ericrw

Chris, Same TX. The rx would nor respond on the field,at the start of flying. I tried to re-bind at home but to no avail ! Interested to know as to why yours responded, in the workshop . eric.

My Apprentice SAFE receiver, after two years use will not re-bind. As any one had the same experience? An e.mail to Horizon Hobby, was not of any forthcoming help; other than buy a new one !!

Can some one remind me as to how I calibrate my motor, for it to respond to my throttle movement. The Elev, Ailerons and the Rudder all respond to the transmitter, except the motor.

Has anyone converted the Black Horse Travel- Air to electric power ??

Thanks for your quick response ! It is for an E-Flite Apprentice, which is made of Z-foam. The label only states Solarfilm. There is no finish on the wing. I lost it in the sky because of the white colour and intend to put a dark cover on the underside of the wings.

Can Solar film be applied to a foam model ??

One of the other models that I put an eflr130031 safe receiver into, was a "Flying Super Model" Fokker Dv11. I had to follow advice from "Rcgroups"; which entailed making alterations, within my Spectrum D6 Tx. They have a designated Blog for " Installing Safe RX into another `plane". Members have added their modified models to a list, which is quite numerous. With regard to my model, It does not take-off or land purely by it self; you have to control only the throttle and ensure the model is flying inline with the runway ! The safe Rx automatically, adjusts the other controls .

Hi, my interest in such Safe receivers is because I have, because of age 87yrs and recent heart surgery, I found it necessary to fly models with the EFLR310013 Safe Rx, for eg, Apprentice. However, I have been able to install this safe Rx into other models; which takes a lot of the anxiety away. There are 3 modes, beginner, intermediate and experienced. I fly mostly in the intermediate mode and if you aim the craft in line with the Runway, and slowly reduce the throttle, it will land by itself. I expect it would also Take-Off in the same manner but I`ve not tried that yet. Anyway thanks to all who contributed.

Is there a Safe receiver that enables models to take off and land itself ??

Can anyone recommend a mechanical winder, for a rubber powered model ??

I`ve found it, 77mm from leading edge of top wing !!

Hi, When locating the C of G on a bi-plane , should it be on the top or the bottom wing ??

Hi Old John B, I`m 87 and my Safe receiver is a EFLR 310013 and I have had no trouble in binding it to my Fokker D V7.

The new switch works OK... Do not worry Lads, I will be careful !!!

This particular RX needs to be switch on, whilst holding it steady on the runway, to allow the ele, rud and elev to do a "dance", then she is read for flight !!!