JACK

hi john,l am in chepstow south wales

my 1/4 scale T-21 is sadly for sale,it is now too big for me to transport,as a result l have not flown it for a couple of years,it needs the paint work tidying up as a result of languishing in the workshop,all offers considered,thanks,jack.

Hi all,daft question but,what is the best adhesive to use for bonding to polyester base grp???,back in the day l used araldite,never had a problem,but l have not fitted out a grp fuz for many years,so am wondering what is the best to use nowadays???,l know that epoxy does not bond to grp,so l am tempted to use araldite again,cheers,jack.

sell or swap a set of 1/3rd scale PA25 pawnee u/c....this is a Hangar 9 set of gear with wheels and dampers and is totally unused,l bought it a while ago but plans changed,so its now in need of a home,no idea of value now,but it wasnt cheap,offers please or am willing to swap,possibly a 1/5 or 1/6 scale glider airframe???

Hl,this came to me from Cliff at laser cut sailplanes with a built up wing kit,l had one "way back in the day with the canopy airbrake,so l decided that it was time for another,enter cliff stage left!!,but l dont plan on installing the canopy airbrake though!!!,thanks for your help,all the best,jack.

Hi all,just come in to possesion of a sean bannister algebra and am looking for info on the "t"tail setup.....there seems to be a few versions of the algebra tail set up,the fus l have has the moulded cap above the rudder which also carries the tailplane,any info much appreciated,thanks,jack.🎆🎉 happy new year!!!

thanks all,fantastic response!!!!!,l believe l will contact the BMFA to clarify things further,also,l will get the clay club to check with their insurers,l agree that a delta design may well be the way to go.

ok gentlepersons,this is a weird one!!,l have been approached by a local clay pidgeon shooting club as to the possibility of supplying a target aircraft and pilot services.....l am not even sure if this would be legal,but,assuming it is,can anyone suggest a suitable airframe,to be powered by a .40 glow engine????,l really dont think an electric set up would be advisable for obvious reasons,build costs would need to be low,this is a new one on me,cant wait to reqad the responses!!!!

hi all,got a prob with my tx16s,l updated the tx to 2.3.11 okay,l also changed to a new 32gig sd card, but when l put the card back into the tx and power up l get a "bad radio data" message and l really dont know why,switching back to the original sd card gets the tx working fine again....the replacement card is brand new and has been reformatted,the sd data came from open tx,l must be doing somethimg wrong but cannot work out what....can anyone help???,cheers jack.

Anybody know where l can get a small footed tacking iron???....cant seem to find a supplier anywhere.....l know they used to exist but maybe no longer,anyone have one for sale??,pm me if so,thanks,jack.

in case its of any interest,l have an original fuselage for a MINI RACER from solent sailplanes......l also have some info regarding wing sections etc.......if there are any competent mould makers out there l would be willing to make my grp fuselage availiable to produce a mould from,it isnt a full size ridge racer l know,but its maybe the next best thing!!!,pm me if there is any interest,....jack.

well now alan,should you need to find a good home for your mijet there is always room in my hanger!!.....l am on a long term nostalgia trip,looking to revisit the designs of my (misspent) youth!!!,l flew on the malverns back in the day,my Mijet being my favourite......PM me if you would like to sell!!!....jack.

l,ll give it a go!!

sorry piers,but l too had a mijet back in the day,and it wasnt a "wing",looked just like the one for sale!!

thanks for that caveman...email sent waiting to hear back