-
Posts
390 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Brian Lambert
-
I think you are looking for stencil film
-
Depron is normally available from the balsa cabin.
-
The slightly shiny rubbery, bendy stuff rather than little bobbles stuck together is EPP expanded polypropylene.
-
2024-T3 is probably what you need.
-
Have we tried pluging in a servo to the throttle cannel to check the receiver is working?
-
Need to know what to do next and where I will be going, with Ender 3.
Brian Lambert replied to Erfolg's topic in 3D Printing
Another vote for Cura. And yes use the latest version on there web site. -
Need to know what to do next and where I will be going, with Ender 3.
Brian Lambert replied to Erfolg's topic in 3D Printing
The file from thingiverse will be an STL file, you need to run it through a slicer to produce a "g"code file that the printer can read. -
Do we know it is illegal? Does it have a CE mark on it? if so it would be legal to operate in the UK.
-
Don't forget that the UK is not in the EU anymore! There is no reason that non EU radio gear can not be used it will not cause any problem to others or yourself. There may have been a technical offence of importing a non compliant electronic device, but if it was not for the purpose of trade then I am not sure it applies. Scrape the label off and go flying. Other advice will be along soon I am sure.
-
You could lift a Mini with that, or at least make it go very fast.
-
Yes the S148 will work with the R8EF receiver.
-
Could it be carburettor icing? As for the chain bearingboys.co.uk carry lots of chains.
-
Just a thought, is there a capacitor (condenser) across the points? they can fail shorted when hot.
-
They do say on their website that Royal Mail can take up to 14 days!
-
3d printer recommendation
Brian Lambert replied to Jon H's topic in Model Engineering and Accessories
"We definitely need something plug and play" Better up the budget then, look at some of the educational offerings for really easy to use machines. -
3d printer recommendation
Brian Lambert replied to Jon H's topic in Model Engineering and Accessories
Of course 3D printing can turn into another hobby. There can be so much involved. -
Latest open TX is version 2.3.11 probably best to go for that one.
-
3d printer recommendation
Brian Lambert replied to Jon H's topic in Model Engineering and Accessories
I have one of these probably the best value for the money, but at this price they need a bit time to get to know how to get a good print. -
Hawker Tempest Sarik part kit B. Taylor PLAN
Brian Lambert replied to Eric Robson's topic in Warbird kits
No personal experience, but these people have been used by others on here. -
May see you at the field then, Dave will sort you out, but if you need anything answering just PM me.
-
Spektrum transmitter?
-
Now I know nothing about the workings of these transmitters, but wouldn't the designer put a 3db attenuator on the higher output chip so that all protocols would benefit from the full output power allowed? Just a thought.
-
Hi Mr Bones, we could use some younger members in our club, so if you are looking for a "local" club put us on your list, Surrey radio control club
-
I am confused 4dbm is only 2.5mW this can't be the out put power can it? It must be amplified for output and therefore the P.A. power would be more relevant. I told you I am confused!
-
I think this applies to the Radiomaster transmitters with the multi protocol module. But please do a range check before flying.