Jump to content

trebor

Members
  • Posts

    2,155
  • Joined

  • Last visited

Everything posted by trebor

  1. I can't understand why he's got no bad feedback
  2. trebor

    X8R update

    Are we talking about the Tx bootloader
  3. trebor

    X8R update

    How would I flash the Tx with V2.1 firmware ? I know how to update opentx.
  4. trebor

    X8R update

    I can confirm the loss of radio link with my Riot, I'd just taken off about one mistake high I tried banking to the right and it went left. Then regained signal as it hit the deck
  5. trebor

    X8R update

    I just looked at the readme file in Taranis and it says boot version the same as opentx. BOOTVER opentx-x9d+2.3.9-otx (60e1edc1 )
  6. trebor

    X8R update

    Posted by Kevin Fairgrieve on 16/07/2020 18:16:02: V 2.3.9 refers to the version of OpenTX and not the radio firmware, which will probably be V1. Hope that helps. Kev Edited By Kevin Fairgrieve on 16/07/2020 18:21:43 Im confused, I thought the Tx firmware was opentx ? Whats V1 and V2 how do I tell what I have got ? All I have ever done is update the opentx version. Will this mean I have to update all my receivers
  7. trebor

    X8R update

    Thanks, Kevin but you have lost me I have lost the plot.
  8. trebor

    X8R update

    I didn't know there was a v2 firmware, I quite liked this radio before the other protocol came out. It's getting a bit confusing. I cannot understand why I was having trouble with low rssi signals when range testing all of a sudden and all I did was update the Taranis, so I thought I would update the X8R. I wish I had never bothered
  9. trebor

    X8R update

    I seem to be in a pickle, I just updated my X8R rx with the latest Accst-2.1.0 lbt and my Radio Taranis X9D+ was already on version 2.3.9. I now find they will not talk to each other I just checked Frsky site and spotted a comment ( History firmware download not compatible with v2.x.x ) does that mean I have had it ? I looked for an older version and could not find one, there seems to be only one download to chose which covers the X6R and X8R receivers in the discontinued section.
  10. I saw the advert at screwfix mentions it’s water based. I might get some to see if it would work on soft balsa that seems to crack as soon as I look at it
  11. Has any one used Mdf sealer ? Would it be any good as sanding sealer or fuel resistant on coverings ?
  12. I might see it this year with a bit of luck
  13. Watching with interest, looks very nice in yellow. What tail wheel have you used ?
  14. trebor

    Sd card update

    Too late I went ahead and did it. I copied the SD card before I started just in case, but it worked anyway The only drawback was the time it took. Its quicker to pop the card out and stick it in the computer.
  15. trebor

    Sd card update

    Could some one help, I want to update the SD card in my Taranis x9d+. I updated Opentx ok but never used companion to update the SD card. The last time I did it I had to move the files over and sort out sound files by hand as it were Now Companion is asking in Syncronize SD part, Sync direction ( both ways , to destination folder first ) and Existing files, ( copy only if newer and different folder first ) Is ths correct ? or do I change it ?
  16. I will just have a look for a motor in the box of bits
  17. I did find this plan on FB which links to the same site link   Now on order  Thanks chaps  Edited By trebor on 04/03/2020 10:50:58 Edited By trebor on 04/03/2020 10:51:37
  18. Posted by Richard Harris on 01/03/2020 19:27:35: Maidened my OOWAH combat flying wing today, handled the 20 odd mph gusts ok. Good fun.......for a fixed wing Where does one get the kit or plan ?
  19. Pete, of course it was "tongue in cheek" dont forget to delete your post with my quote in case they report you
  20. Posted by Old Geezer on 23/02/2020 11:01:24: Nine quid and a bit of form-filling is hardly "The end of life (or in our case rc model flying) as we know it". But the thing that bugs me is not the nine pounds but over 36,000 members thats £324,000 for what ?
  21. I want my £9 back if we are exempt for half the year or at least £4.50
  22. That would be too easy instead of that we might have to change the numbers every year what a load of tosh. You should use a removable label as your operator ID may change when you renew. You’ll need to remove your label if you’re no longer responsible for the drone or model aircraft.
  23. Pete, how did you go about making a nice job of your registration number sticker ?
  24. I had a Dx6 v1 with a single antenna. I got fed up with Hold Last Command, switched brands to get a better choice of failsafes at a good price. Edited By trebor on 16/02/2020 09:00:16
×
×
  • Create New...