Keith Newman

Richard. Daft question, but thought I'd ask. If one was wanting to build both versions (together) do we need double of everything in the above mentioned materials list? Just curious if there is lots left over before ordering Balsa. Many thanks

Sorted it. I was taking some details from the ebay add When I actually googled the psu 7001452 j000 Z750p Plenty came up Got it powered up, fan speed lower and soldered some terminals to the 2 outputs. Thanks all

Tried Google for this psu (link to ebay above) but cannot seem to find my particular psu for details of the pins to get it to switch on I'm guessing not all Dell Server psu's are the same. So could be dangerous to just try randomly?

Thanks Well just bought this one on eBay https://www.ebay.co.uk/itm/352655490889?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=m2sL2f3yT-e&sssrc=4429486&ssuid=3ZeKVDjtT2S&var=&widget_ver=artemis&media=COPY Just got to work out what pins I need etc.

Thank you. That seems a good idea Just looked on eBay and those proliant psu's are only from £10 upwards with anything from 400w upwards on 12v Are there some simple 'hot too for coverting them then to give me 12v for use at home Thanks

Hi Thinking of getting a bench power supply and wondered if any of you have any experience with them. Thought it would be useful for various things Like when setting up a model instead of having to use a Lipo / NiMh pack For powering some Lipo chargers (some can take more than 12v input (which I normally use from a leisure battery) ) Noticed quite a few of Amazon. Just thought I'd ask on here for views Thanks

Hi. Doing a Gee Bee Need some pointers of best way to approach the white covering on the vertical stab i think its called? Anyhow. The tall bit before the actual rudder. A few curves in it. Not sure if a heat gun and covering iron will sort it or how to actually do it neatly Hoping for some super advice from some of you great covering wizards. https://linksharing.samsungcloud.com/cQBTekiS6oaw https://linksharing.samsungcloud.com/nvJafG2T9BTj https://linksharing.samsungcloud.com/xIomhnhXxJ8F All going to be white

can anyone give some advice on this model. Was trying to get one sorted today for a fellow modeller. We managed to hook the white single signal wires from the included stabilisation unit to the receiver for throttle, ailerons and elevator that worked. Rudder wire has three wires. Could not get it to work at all. Although the rudder would move a little during self test. Connections seemed OK and the flight mode wire - Could not seem to get that sorted. So model has elevator, ailerons and throttle working okay. It does it self test but no idea how to set rudder or flight mode up. This is on a spektrum dx8 G1. Any advice would be great. Thanks

Any more information in this motor please. As just come across one that is now in my possession. prop. Lipo etc etc thanks

Yes. Seen all the basic details Bob. Just wondered if anyone had any real life information like what Lipo works with what prop etc and esc.

Bob. ( or anyone ) that can help. Your motor you used. The e-flite BL50 i have one available that I may use on a Gee Bee that I am using. but like you found. Details of the spec of the motor are none existent. I want to use it on 5s lipo’s preferably with a 15x7 prop. but need to Know some specs. ESC. Watts etc. can anyone help perhaps with some details? thank you

hi just a heads up. Popped into our local Aldi. Selling scroll saw from £60 reduced to £40 this was in Clay Cross Chesterfield Derbyshire but I’m sure the prices will be the same across all Aldis just for somebody may be interested in it

Many thanks Adrian. Much appreciated

Hi Guys, in the process of sorting my old chilli breeze out, but i do not have the plans and I need to know the C of G please if someone would be kind enough to post the figures for me that would be great. Mine has a Mega Motor 22/30/2 fitted and yet to fly it ( did try it with that motor and a 4s 3200 lipo and 80amp esc) but didnt check amp draw etc before flight and killed the esc. Think it was turning a 14x4 apc so I think that perhaps is what killed the esc. I am thinking of a smaller 9 / 10" prop next time and I will check with a watt meter this time too! Thank you

Hello. As title above, Hitec. Hs-56hb Anyone got a spare double servo arm. Can’t seem to find any in my box of spare arms to fit Many thanks