David Barker 2
Members-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by David Barker 2
-
DB Sport and Scale Auster J1 Autocrat
David Barker 2 replied to Danny Fenton's topic in Scale Matters
Hi Danny on my laser 80 I ran breather pipe to front when tank is full it runs out you can connect apiece of temporary pipe and catch it in a pot. Also the air forced into pipe will cause a small vacuum in tank . Dave B. -
DB Sport and Scale Auster J1 Autocrat
David Barker 2 replied to Danny Fenton's topic in Scale Matters
Hi Danny hope this helps. -
DB Sport and Scale Auster J1 Autocrat
David Barker 2 replied to Danny Fenton's topic in Scale Matters
on my top glazing the edge has a 5mm lip that fits into a groove cut into ribs and tucks under front glazing held by a small magnet and two small magnets at back, as hi Tec as that but works. power is a Laser 80 4 stroke. plane weighs about 9ibs approx. last flight ended with a tip stall when turning (pilot error) got away with just damage to cowling new one on order . will try harder next time. -
DB Sport and Scale Auster J1 Autocrat
David Barker 2 replied to Danny Fenton's topic in Scale Matters
-
DB Sport and Scale Auster J1 Autocrat
David Barker 2 replied to Danny Fenton's topic in Scale Matters
certainly makes mine look second rate. -
Anyone built the Farmhand 60" from Sarik Hobbies recently, and fitted a Laser engine. If so did you manage to get fuel tank at correct height to carb. Thanks Dave B.
-
Anyone built the Farmhand 60 recently from Sarik Hobbies. As Im about to start so any problems to look out for. Thanks Dave B.
-
ok thanks ill have to keep looking.
-
Hi All, Has anyone bought a model from Sarik Hobbies called Rusty Ferguson crop duster size 65" or Farmhand 60". If so what ic engine did you fit in. As I have a Laser 80 going spare and was wondering if it could be fitted in either model and which would be the best of the two. Thanks Dave B.
-
Thanks all for help.
-
just updated from a Spektrum DX6i, to a NX8 with an AR8020T. Which seems a big jump. Can someone tell me what servo plugs go where on Receiver as only numbered. 1-8. would need to use Au 1 etc for setting -up Differential for Ailerons. Thanks. Dave B.
-
Hi All, would like to build the Farmhand model size 60", from Sarik Hobbies. The IC Engines they recommend are Four Stroke 0.52- 0.90. If any one has built this model recently with an IC engine what engine did they fit. I have a spare Laser 80 wonder if this could be used. Thanks for any help appreciated.
-
Thanks all for your comments, will have to have a big think.
-
Just finished building aDB Sport & Scale Auster. With a Laser 80 engine fitted. Still got a Laser 80 to use any suggestions of something easy to build or kit and easy to fly to use the Laser 80. Thanks Dave B.
-
Iam about to solder my first Multiplex plug on a battery lead. What is the best solder to use leaded or with flux.
-
Advent Prize Draw - 24th Dec - last one!
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
go on then. -
Advent Prize Draw - 23rd Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
please please. -
Advent Prize Draw - 22nd Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
yes please. -
Advent Prize Draw - 20th Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
yes please. -
Advent Prize Draw - 18th Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
yes please Santa ive been a good boy so far. -
Advent Prize Draw - 17th Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
go on then. -
Advent Prize Draw - Dec 14th
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
yes please. -
Advent Prize Draw - 10th Dec
David Barker 2 replied to David Ashby - Moderator's topic in All Things Model Flying
ill give it a go.