David Soper

Hi have a 4 year old DX6 recently replaced Li Ion battery. Its now decided to not power up, Logo flashes, LCD screen flashes has anyone had same problem?.... is it repairable or am i looking at a new transmitter.

Any idea why i get the perpetual circle of orange death on the hobbyking web site?

Thanks Geoff and Keith, Tape on order, does it bond well or would you suggest touch of glue David

Hi Guys ive managed to break the rudder off on my foamy Tundra. What is the best way to repair, Ive tried tagging with glue but it is either too fragile or too well bonded and not free movement. Thanks

Hi Martin i of course ran prop without spinner and the vibration was the same .. thank you Peter i will look into you suggestion

Thanks Geoff I suspected the prop was unbalanced and i will invest in a watt meter, this is where aero models gets beyond the 'novice' and into a lot more 'stuff' !

Thank you for your advice, Century also advised me to reduce prop to 10x6, which will reduce load on esc. I understand it will reduce power/thrust, I got a lot of vibration on this prop, i suspect its a not well made prop and is unbalanced. I guess you get what you pay for... i think i should maybe get more into prop balancing!! I still ask if i can upgrade to a higher Amp esc so keep my lovely balanced prop and power should i ever need it

Been flying couple of years and still consider myself as a novice. I have a 40A esc running on 4s battery with 11x5.5 prop. (Ruckus) they say it will run happily on 4s with either 11x5.5 or 10x6 prop. ( I only running 4s because i crashed the Riot XL and have 4s batteries spare) I have not maiden flight yet, so running out of flight is proberbly not a true reflection on how hot or how much current the esc is drawing, as no true air flow for cooling. It does seem to get quite hot, cannot easily hold esc in hand after 5 mins at 50% throttle. I guess the only thing is to see what esc is drawing in current... im not sure how to do this. If i discover the esc is drawing close to 40A would changing to 50A esc be better?   Edited By David Soper on 01/02/2019 13:19:07

Does anyone know why we getting Master Server not found ?

Thanks all for help, your right why need 4s if it flies well enough on 3s

Have just taken delivery of the Ruckus, bench testing it as one does, Intend to fly with 4s battery .. the ESC after a few mins running is really hot, that worries me! Its branded as able to run on either 3 or 4 s battery, also strugging to work out how to fit battery, esc, rx and all the wires into such a small compartment

None of this is helpfull lol.. Its a Horizon Hobby model, using spectrum radio DX6 and Rx AR636. Its a bind and fly so everything pre installed. The servos should not 'step' so something is amiss

I have disconnected push rods so there is no load and they still seem to step, on all my other models servos are smooth, just cant work out why on this model they are not.

The servos on my model are what i describe as 'stepping' not 100% proportional to stick movement, does anyone know why and what i can do about it?

Thanks... That was my other option to ditch the Rx I will google Lemon Rx as ive not heard of them