Jump to content

Alan Davidson 1

Members
  • Posts

    13
  • Joined

  • Last visited

    Never

Alan Davidson 1's Achievements

0

Reputation

  1. Thanks Manish I had forgotten about Outerzone for the plan. Now I will seek actual cockpit details for both cockpits as I believe the layout was different. Thanks again
  2. Hi esteemed community I am in the beginning stages of refurbishing an ancient 71” Moth minor. I think it’s a Pilot kit but not sure. I am seeking details on the engine cowling and any cockpit details. I have tried Mr Google to limited results. Is anyone out there who may be a help?
  3. The Spearfish looks interesting if not a little expensive. The Sperber was a T tail at 74” span. The wing tapered by 1” to the tip with a 1” forward sweep. I have a kit plan but not details of wing ribs, formers or fuselage width and when I built the original kit I was too green to make templates for further use. Thank you for your response Alan
  4. I too have an interest in finding long dead Mia kits. I am seeking both a Sperber glider and a Spearfish RCM&E boat any help out there. (I am already getting counselling 🤪
  5. My son’s constant anxiety if he fails to come home one day is that his wife will sell his models for what he told her he bought them for🤪
  6. That was lucky, a few feet to the right and you would have had to walk down the hill to get it back!
  7. I have solved the problem. My secure isp blocks the download to give the access problem. Thanks folks AD
  8. Found an interesting occurrence; when I login on computer I can access the archive. When using my iPad it gives me the access problem I describe. Has anyone any ideas as to why and how to cure it? AD
  9. The viewer does take some getting used to, but my problem is fairly recent as I had no problem at first. Still heard nothing from the mag people though. Ad
  10. When I try and view archive rcm&e mags I get An Error Has Occurred I'm sorry but we can't process your request at this time (bad referrer) Is anyone else suffering from this? It has been like this for some weeks. I have contacted the mag but not yet received a satisfactory outcome. AD
  11. Thanks guys will try the smaller prop range for experiment and gently see what results, and then the 2s with the 10x6 prop with a view to using this configuration Many, many thanks for all the wonderful assistance. I will post again if it all goes well. I will also post pictures of the smoking wreck if it doesn’t. Thanks again Al
  12. Thanks for all the help folks. The details are flying weight 1.4kg 46” span, 8.5” cord the motor is a graupner compact 345z #7738 1500Kv, 7.2 - 11.1 v, 20 - 35A, spinning an 11x6 on 2s and 10x6 on 3s for the 10x6 the blurb quotes 27A and 11x6 - 32 A. and states the motor is compatible with a model between.75 and 1.5 Kg auw As I said in my original post, even using the higher volts available from the 3s lipo, the current draw is well outside these guidelines. Hence my uneducated confusion. The replies trend toward trying a lot smaller prop and try and ascertain if the power train is a: incompatible or as I think b: the power train is incompatible given the prop size / efficiency.. Where did I put my glow fuel....🤔🤪
  13. I have converted my Derek Woodward Amelia to electric and chose a motor esc combination based on model size and a prop 10x4 9x6 basis it flew ell on with an ST G20-23 glow (did I say I was old). When I ran the combo (Graupner 7738 30A motor with 40A Overlander esc the max throttle reading climbed through 70A. Didn’t realise how fast I could cut the throttle! The 9x6 prop still exceeded 55A on full power. As a total newby to electric can anyone help please or should I wait for November when none of us maybe flying Al
×
×
  • Create New...