morton01

Hello Shaun, Many thanks for your latest suggestion, the article you shared helped me massively. The upshot is that channel 6 being off resulted in panic mode being selected. I have reversed that channel and the plane elevator now performs perfect. I owe you a beer! Cheers Tony

Hello Shaun, Thanks for your reply and sharing the video link. I am pretty sure I have covered everything in the setup, but still getting reduced throw on the elevator despite the TX monitor function showing full movement....Maybe I am missing something here; got me baffled at present..... Cheers, Tony

Hello Simon, Many thanks for your reply. The DX6i is 2014 vintage and is DSMX. I have deleted all previous models from the memory of the TX and am just trying to use the Aeroscout only. The monitor function displays full travel for all control surfaces... I have not altered any settings in the TX presently - only binded the TX to the RX. Many thanks....

Hello All, New here and hoping for a little kind assistance... Have just purchased a brand new electric Aeroscout BNF model following several years away from flying. I have an old(ish) DX6i which I propose using for the time being... Now onto my issue, having successfully binded the TX to the receiver, and having reset the model in the TX, I am seeing what can only be described as very limited elevator movement, both up and down. Aileron, throttle and rudder all operate fine with 'full movement'. With the plane powered off the elevator servo operates smoothly by hand in both directions and operates the elevator fully. Any advice / guidance gratefully received..... Many thanks