Wor'Keith

A free one that I use, is Photoscape. I use it a lot, just put. Photoscape into your browser, to find it.

Yes please.

Yes please.

Yep. I'm in please.

Ian. I converted my old 35 Mhz Futaba FP-T8UP to 2.4 Ghz some years ago, using the Corona Futaba (full range) conversion module with no problems. So all my models have corona receivers fitted. The Futaba corona module ( will not fit ) the TURNIGY TJY 9X it’s the wrong shape. The JR Corona module ( Will ) fit. And also ( Binds ) with the Corona receivers that are in my models. Thus saving me a considerable amount of money, on the cost of replacing with new ones. A new 8ch Corona receiver, from GC at this time, is around £13.00p. If you have to buy new module and receivers. There are several options now on the market that will fit into the TURNIGY TJY 9X . The FrSky set up also has a good write up at this time. So shop around. Reg’ . . . Wor’keith.

  Hi. ( I chose the Lipo option, have used them for some years .)   I’ve had my TJY 9X Transmitter about 3 weeks now. Have fitted the smartyparts board and a backlight. No real problems, some minor soldering. I’ve also removed the Turnigy Module on the back (only the gray aerial lead to cut). And replaced it with a JR (Corona) module, it’s a push fit, with no modifications.! It cost £11.60p, from GC. I had been using a Corona (Futaba) 2.4 module, in a very old FP-T8UP that has reached the end of its days. The 8 channel CR8D receivers that were being used with the (Corona  Futaba  module, in my models, all work, (re-bind) with the new (Corona ‘JR ‘module.)    The other modification was fitting a Gens Ace 1800mah 3S 20C from GC £10.53p. A tight, but perfect fit in my new TURNIGY TJY 9X Transmitter. Had to (modify the connectors, using 3mm bullet.) also used an added 2 Cell Balance type Lead, from GC 34p, in order to plug it into the transmitter. ( be sure to connect the +(positive red) from the battery, into the (middle ) pin in the 2cell connector, which is white on the plug that I used. cut off the red outside lead on this little plug.) Maybe this will be of some help. . . . Wor’keith.     Edited By Wor'Keith on 31/10/2012 11:54:40 Edited By Wor'Keith on 31/10/2012 11:56:46

Wish him well . . from me Ken, not seen you all for awhile, in between . 'wheels' . at this time. Wor'Keith. . .

Unfortunately . . Roving NE1 . reporter Ken, ex News of the world & a pending candidate to go in front of the ‘Levinson’ enquiry, for his more than ‘colourful’ reporting. Failed to add, that he had twiddled with the ‘tranny,‘ wires, and stated that it seemed OK now!. A good day, great to meet up with the gang again. Wor Keith. . . HTP . summer wine. ‘Tranny’ shaking, Division.

Signed. . . Keith.

Managed to get down to the bay . . Yesterday 4.0 O’clock ish, knew from local forecast that it would be ‘wild’ but hoped that the wind would have eased off a little. Enrico . John . Roger, were the last men standing. Enrico was flying his M60, in testing conditions. John was flying another . ‘Plank’ . ending in the back field on arrival. Rogers . ‘Zaggi’ had long been retired to the car. Wind meter reading on the lip’ was av’ 30+ mph. Just on the wrong side of N. (Well out of my. ( Weasels) . comfort zone). Wind forecast looks wrong side of N. for today. Sunday looks a maybe. . . . Wor’ Keith.    

   Why not try a . . . . `Kite’?   .  .  .  .  .  Wor'Keith.       

   Try.  .  .  . Acetone.