Tony Richardson Posted September 22, 2020 Share Posted September 22, 2020 Phil Doug, if you go to FS home page in the top right corner is a menu of their products, click on "cowls and accessories for kits, scroll down until you see HANGAR 9 - its on the left side - click on hangar 9 scroll down to the 15th or 16th item HN10 and a cowl is listed for the hangar 9 P 47 Thunderbolt 60 cowl.. Tony Quote Link to comment Share on other sites More sharing options...
Edgeflyer Posted September 22, 2020 Share Posted September 22, 2020 Thanks Tony. Yes I have found their P47 60 cowl which with shipping comes to 102 dollars! If its flimsy like the original h9 one that is very expensive. I shall press on! Quote Link to comment Share on other sites More sharing options...
Tony Richardson Posted September 22, 2020 Share Posted September 22, 2020 So around 80 quid? the two pieces I got from them were quite sturdy but they were wheel pants not a cowl, Tony. Quote Link to comment Share on other sites More sharing options...
Dale Bradly Posted September 23, 2020 Share Posted September 23, 2020 +1 for Fiberglass Specialties. Ive made a couple of orders from them. The product is top quality, better than the OEM. By the time you add a spare cowl (you know you'll need it in a couple of years) and something for the next project too, and then compare that with setting up yourself with produce something similar, it's pretty cheap. And I'm in NZ, so no cheap shipping for me. Quote Link to comment Share on other sites More sharing options...
Edgeflyer Posted August 18, 2021 Share Posted August 18, 2021 Where did a year go? After various problems Im trying to get back to this project. I had to remake a mould in one piece as the 2 halved wouldnt join due to deforming or inaccuracies. I now have a joined up cowl for the P47 60 and just need to smooth and prime it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.