MattyB Posted September 18, 2021 Share Posted September 18, 2021 20 hours ago, Upkeep said: Dunno how to re-set the ESC with the DXs I've noticed that with the trim button in the neutral position, the motor wont fire up till its reached one of the lines on the gimble. Maybe 5mm ? I'm wondering If at some stage I have inadvertently adjusted/re-calibrated the sticks somehow. I can of course bring the throttle down with the trim bit im wondering if ive lost 10 % power as it is. Try this - most ESCs are calibrated this way or something very similar. Prop off if inside or secure the model firmly if outside. Tx on Throttle to max Connect battery Wait until beeps cease, then throttle to zero Unplug battery Retest motor to see if it has picked up any RPM 1 Quote Link to comment Share on other sites More sharing options...
Upkeep Posted September 18, 2021 Author Share Posted September 18, 2021 (edited) I popped a 4 bladed prop on it. It goes like crazy now. LOL Had some great fun with it today flying into wind, with flaps down it was barely moving and landing on a dime Propeller (P-51) (10x7.5) ARRPROP002 And I just bought a NX6 so that should be here Monday.... now the tough part of choosing the next model Edited September 18, 2021 by Upkeep 1 Quote Link to comment Share on other sites More sharing options...
MattyB Posted September 20, 2021 Share Posted September 20, 2021 On 18/09/2021 at 18:16, Upkeep said: I popped a 4 bladed prop on it. It goes like crazy now. LOL Had some great fun with it today flying into wind, with flaps down it was barely moving and landing on a dime Propeller (P-51) (10x7.5) ARRPROP002 And I just bought a NX6 so that should be here Monday.... now the tough part of choosing the next model Make sure you check the current draw with a wattmeter - your new prop could add significant load and increase current draw beyond the specs of your motor and esc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.