Frank Skilbeck Posted October 2, 2021 Share Posted October 2, 2021 Tony, just for future reference the +ve and -ve pins on the receiver are on a common rail, so it doesn't matter where you plug the battery/power supply in. Indeed some manufacturers on their smaller receivers don't even have a battery port, and if you are using all servo ports and need a separate power supply (e.g. IC model) then you can simply use a Y lead on one channel and plug a servo and the battery into that. Quote Link to comment Share on other sites More sharing options...
Tony Harrison 2 Posted October 2, 2021 Author Share Posted October 2, 2021 1 hour ago, Frank Skilbeck said: Tony, just for future reference the +ve and -ve pins on the receiver are on a common rail, so it doesn't matter where you plug the battery/power supply in. Indeed some manufacturers on their smaller receivers don't even have a battery port, and if you are using all servo ports and need a separate power supply (e.g. IC model) then you can simply use a Y lead on one channel and plug a servo and the battery into that. Thanks Frank - to remember this useful tip I need to print it out and stick it somewhere prominent... rgds Tony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.