SIMON CRAGG Posted February 12, 2022 Share Posted February 12, 2022 A clubmate is in the process of converting a model powered by two 64mm 11 blade EDF's. He has fitted two 70a ESC's. On checking the set up with the watt meter he was pulling just over 70a. Is that ok, as it spreads the 70A between the two ESC = 35A each? Thanks! Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted February 12, 2022 Share Posted February 12, 2022 Yep, if you are reading the load from the battery to both ESCs, it probably won't be exactly 35A each due to slight differences (manufacturing tolerances) in the two fans etc, but it will be very close. Quote Link to comment Share on other sites More sharing options...
john davidson 1 Posted February 12, 2022 Share Posted February 12, 2022 and it will unload in flight 1 Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted February 12, 2022 Share Posted February 12, 2022 Out of curiosity, what's he converting it to and from ? Quote Link to comment Share on other sites More sharing options...
Paul De Tourtoulon Posted February 13, 2022 Share Posted February 13, 2022 13 hours ago, john davidson 1 said: and it will unload in flight I did an experiment with one of my Dle 20Ra's and I was surprised at the speed that et went up to in the air, worth looking at,,,, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.