Jump to content

4 channel RX and elevons


Zflyer
 Share

Recommended Posts

Strange thing. I have used the elevon type in the wing set up. The elevons work, however they do not work in the correct stick movement. Up and down gives left and right, whilst aileron stick gives up down. I have tried swopping servoe leads around, too no avil and I can not reassign the main control surface channels. It works fine on one of my other models but not this one. The other is a six channel rx this is a 4, but there should be no difference. Suggestions anyone

   

Link to comment
Share on other sites

Before we had computer radios, if the mixed controls were wrong, this list of variations would fix it.

Working down the list in turn & testing after each step until its right:

1. Clear all reverse settings & try the controls.
2. Reverse the first servo
3. Clear reversing on the first and reverse the second servo
4. Reverse both servos
5. Swap the two servo plugs in the receiver and go through the list again. One option will definitely be right!

Cheers
Phil

Link to comment
Share on other sites

14 hours ago, Phil Green said:

Before we had computer radios, if the mixed controls were wrong, this list of variations would fix it.

Working down the list in turn & testing after each step until its right:

1. Clear all reverse settings & try the controls.
2. Reverse the first servo
3. Clear reversing on the first and reverse the second servo
4. Reverse both servos
5. Swap the two servo plugs in the receiver and go through the list again. One option will definitely be right!

Cheers
Phil

Yes In a nutshell, after that V tail mix or change your radio.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...