tizdaz Posted August 8, 2022 Share Posted August 8, 2022 Hi guys, i need some replacement pushrod for my Boomerang (throttle). The original is damaged, i went to my local hobby shop and he gave me a replacement but it seems thinner than the original, so much so it flexes alot, the original one is stiff with no flex. What thickness do i need so it has no bendy flex from just holding it!?, is it 1mm or 1.5mm? i also need the tube for it too so it can pass through the sections etc. Thanks 🙂 Quote Link to comment Share on other sites More sharing options...
Andy Gates Posted August 8, 2022 Share Posted August 8, 2022 I can't say for certain but I would expect it to be at least 2mm thick to match the clevises Quote Link to comment Share on other sites More sharing options...
Nigel R Posted August 9, 2022 Share Posted August 9, 2022 M2 threaded rod is usually 1.6mm or 1.7mm dia on the unthreaded section. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.