David P Williams Posted August 11, 2022 Share Posted August 11, 2022 I’m building a Wots Wot from the Chris Foss kit, not the ARTF. The top wing is designed to be held by rubber bands, which I would rather not do. The kit also contains an addendum to the instruction manual showing an optional bolted top wing arrangement, but I think it looks a bit crude and I would rather not have bolt heads protruding from the top surface of the wing. Has anyone devised a more elegant attachment method that they could share? Thanks, David Quote Link to comment Share on other sites More sharing options...
David P Williams Posted August 15, 2022 Author Share Posted August 15, 2022 Looks like I'm on my own then...🙄 Quote Link to comment Share on other sites More sharing options...
malmaz Posted August 15, 2022 Share Posted August 15, 2022 Hi This is the wots wot I built with the modification, the 2 nylon bolts that hold the top wing in place don't look that bad. I sold the model earlier this year, and the new owner was well pleased with it. Quote Link to comment Share on other sites More sharing options...
David P Williams Posted August 15, 2022 Author Share Posted August 15, 2022 Thanks - you're right, that does look OK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.