Jump to content

Radiomaster T16S Mk2 Model Menu.... missing model templates

Doug L

Recommended Posts

I have an issue on a new TX (4 in 1) which was setting up fine… binding with a receivers etc. and I was programming timers, end points and rates etc. it was also working with edge companion well and I was doing back ups as well when….


I seem get a glitch or loop in the model selection menu. (unless it’s me).


I have lost all the pre loaded models or rather unable to seem them on the “TX”, but I have them all still listed in companion.


If I transfer (write models and settings to Radio) from companion to the TX it only shows the one default model (i.e. the one in bold in the model listed in companion) in the main screen but no models are listed in the model menu selection it in the TX model menu i.e. blank.


So the one default model now on the TX is the only model, now if I go in and create a new model it overwrites my existing default model i.e. I can’t re select the default model because its disappeared. The model I have created is just now a blank template. I can create further templates, but when I transfer a default model again from companion, all the templates are wiped and there are no models in the model menu to select just the default model in the main screen. And this goes round in a loop.


So basically all the model planes, heli, and quad types are missing and I can only transfer back a default model, and this default model disappears when I select another blank model template. And all the blank model templates disappear when I transfer the default model from companion to the TX again.


I feels as if I have a software glitch or something, or am I missing something?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...