Filip Posted March 12 Share Posted March 12 Hi All I have an issue with registering my tw gr6 receiver with x20s radio. Tried so many options and nothing works. Radio stating waiting for receiver all the time. I have download latest firmware for radio and receiver and is not working. I have two same receivers and both can't be registered. Anyone had similiar situation? Quote Link to comment Share on other sites More sharing options...
Konrad Posted March 13 Share Posted March 13 Yes, My fix was to start the binding process with a new model location. This has worked 3 times for me. 1 Quote Link to comment Share on other sites More sharing options...
Philip Lewis 3 Posted March 13 Share Posted March 13 The X20S doesn't have the twin protocol in it so will never bind to a twin receiver, it has TD Access and ACCST V2, if you want to use a twin receiver you are going to have to put a Twin module in the back. 2 Quote Link to comment Share on other sites More sharing options...
Konrad Posted March 13 Share Posted March 13 Ethos supports this FrSky module. https://alofthobbies.com/collections/modules/products/frsky-tw-lite-pro-module I use this with a lot of my older full carbon gliders as I don't know how to route the tandum 900mhz antenna to the out side of the fuselage. Be this as it may, going to another model location in the TX often address most binding issues I've had with Ethos. 1 Quote Link to comment Share on other sites More sharing options...
Filip Posted March 13 Author Share Posted March 13 You all right I have order wrong receivers TW instead of archers. New ones on the way. Hopefully will not have this issue anymore and I can finally get my f3k glider out in the air. Quote Link to comment Share on other sites More sharing options...
Konrad Posted March 13 Share Posted March 13 Have you looked at the more modern Archer Plus RX? https://alofthobbies.com/collections/frsky-archer/products/frsky-archer-gr6-access-glider-receiver Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.