James Archer
-
Posts
46 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by James Archer
-
-
-
2 hours ago, Martin Gay said:
The plan shows 165mm behind F4 (safe but nose heavy). Most of the flying Sabres are now set to 172mm behind F4 for a more neutral position.
Set the tailplane incidence to the same angle as the wing, eg 0:0.
4lb 2oz is a good weight.
Great, thanks Martin.
-
-
My 3d printed pilot and seat have just arrived. Need to decide which head to use and then chop his legs off...
- 1
-
Hi Andy, Yes I do, just near the Obelisk that you pass on the A470\A55. You'd think I'd be flying off the Orme every week, but due to family & work commitments I don't get to fly much.
-
-
-
-
I hope so, but this is my first plan build in many years.
I haven't really thought about that yet.
-
-
If anyone is still interested, i'm building one from www.parkjets.com
-
Just Finished my EZE-FAN.Flys great.70mm EDF, 3sLipo.
-
this is the winner
-
Me,me,me,me....
-
-
I've just put standard servos in, as you can see from the Photo I managed to get the single servo in the wing working fine. (Thanks to Peter's Drawing for the linkage). Spektrum AR7000 receiver + BEC off the 40A ESC.
This is also my first attempt at Electric, so I've based my purchase's on the model weight. Put a Cyclon 22 (http://www.cyclonbrushless.com/) on the front with 3s/2200 Lipo.
Will need to cut a hole in F2 for the Lipo and push right back to F3 to balance the CofG.
James
-
This is my first 'Off Plan' Build, going OK after Two Weeks. The wife thinks I've moved into the Garage,.
Waiting for a Lipo to arrive in the post before so I can sort out the CofG before going much further.
-
Hello,
Here is link for examples of colour shcemes etc.
Cheers
James
-
win win win...
2020 PSSA Mass Build - Sabre - The Completed Model Thread!
in PSSA Mass Build 2020 - North American F-86 Sabre
Posted
My F86 is based on a Canadair CL-13B Sabre Mk.6, N8686F. The plane was used by Boeing as a chase plane and flew alongside the first 747 flight in February 1969.
As this has been my first PSSA build, I followed everybody’s build blog’s and found all your detailed explanations and photos really helpful, Thank you.
Its covered in glass cloth & sprayed with acrylic paint. Weight is 5lb with 100g in the nose to balance. 3d printed pilot from Andy Meade & homemade seat.
It’s just 2 channel with Ailerons & Elevator.