crispin church
-
Posts
544 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by crispin church
-
-
i just changed the pushbutton for a switch on mine but it would be nice to mix it as you said it can be done one thing i see straight away is you say both are -100% have not done that one
well tried that no dont workwhat this off set mine dont have thati havethro - thro actrate d -100% u -100%sw mix trim actno off set setting ?Edited By crispin church on 26/04/2011 18:55:58
-
other forums are stating that on dx6i there a fault and thro to thro dont workso switch is a good thing if you want itwell done for a great post on how to do it i say
-
i did set the mix switchi even tried doing it on elevator and got it to work on there but would not have it on thro to thro
-
on my dx6ii did the 0% and 100% on thro to throand it does nothing at alleven tried -100 to +100 so what am i missing here
-
cg i work on 50 to 70mm works great for meEmax BL2826/06 works great in mine on 11x7yer ok abit over the top but its what i had to hand850rpm/v 9100rpm 48a 2430g of thrust emax saymy batt got hot so remember to got air holes in front and back of fuse
-
i cant say on that onei am mostly i get to is 8 and loops and barrow rollsbut you can get very tight turns and quick rolls it does have loads of movement on all controls
Edited By crispin church on 23/03/2011 13:21:15
-
i got a second hand one may 2010 i put a old os25fp on it loved it but the engine is way past its best so put a Emax 2826/06 with 80amp esc with 11x7 on it worked out same weight of what it took out
> >its flys great battery got very warm so cut a air hole in bottom of fuse about 2" back from the servos and useing the hole for fuel pipes as in let
> >should that be enough?
> >
Edited By crispin church on 23/03/2011 10:28:38
-
Posted by crispin church on 27/07/2010 10:00:26:
1. swindon model center2. rcpitstop.co.uk3.seagull edge 5404.horizon hobbies uki am a wally try 3 and 4 round the other way
-
1. swindon model center2. rcpitstop.co.uk3.seagull edge 5404.horizon hobbies uk
-
join a club and yes insurance most club fees can include BMFA ( thats if your in the UK)which is not just insurance but opens the doors to much more even cheaper tickets to some events i would go powered at least then if you get too low down the hill turn on and up it comes the hills do not get any lower with age go onto BMFA.org there mite be a club near youand go 2.4ghz if you can no worry then if some one is over the other side of the hill with same channel
-
1 MODE 22 WILTSHIRE3 WILTSHIRE4 self taught
-
i got a GWS C130 quad had a motor burnt out going to go brushless can i put more than one motor on a esc was thinking of 2 12 amp brushless on 1 35 amp esc?
-
it is Greman
Century done same to me but place it in days
-
the GWS uses a different type of crystal you need same type of rx crystal i found it also would only work in a cirrus rx not futaba or esky or my sunup
What's the main radio brand you use?
in Model Flying Polls
Posted