[Keil Kraft Gypsy. Electric conversion info needed]

Great build and flight video. Where can I get my hands on the plan for next Winter build.  ?  Thanks

[NiMh batteries]

Cheers ED, I got it at last.  Also I still use my Futaba 35mhs radio for a vintage Super Scorpian  model built in the seventies.  Thanks again for the info.

[NiMh batteries]

Nice story ED. Nimh batts. are quite cheap compared to Lipos so I will purchase what I need of new ones. I am still mystified by the info on Lipos being new to electrics. Right, I charge my Lipos, check capacity and go flying. Pack up, but don’t know when I will fly again. What is the correct procedure at this moment ?  Thank you.

[NiMh batteries]

Thanks both for your replies. I have an IMAX B6 charger that has discharging facilities. I will wait a little longer for info on its use for this particular application.  ps Has this forum a system where I can send private mail to a moderator ?  Thanks

[NiMh batteries]

Hi Frank ,apologies for delay in reply.  I have read that to check the capacity  of battery, you should discharge then re charge. As a newly to electrics could you please explain the procedure.  Thank you. FB3

[Rx Aerials]

Thanks Don.  

[Rx Aerials]

Re my post above regarding arials at 90 degrees to each but not on same plane should have had a question mark with it, asI was hoping for a reply. My apologies.  FB3

[Esc connections]

Thanks for all the info boys, I appreciate it. FB3

[Esc connections]

Thank all. Assuming they may be different, who supplies them? Thank you FB3

[Rx Aerials]

Hi all, both anntenae at 90 degrees to each other, but not on the same plane. No pun intended.  FB3

[Esc connections]

Hi all, as a newbie to electrics I am about to purchase a 30amp esc fot a Turnigy 200 watt motor. Will the connections to esc and motor be comparable ?  Thanks FB3

[Laser engine ID please]

Thanks Jon but I won’t be removing the head any time soon. Let’s say is a venerable old motor and a classic example of Laser engineering and quality, and will soon put it to good use again.  Thank  you. FB3

[Laser engine ID please]

Thank s for all replies.  Hi Jon, on middle of one lug there are letters, MM and after these letters there is a letter K right at the end of same lug. My motor flew my Acrowot for many years, but lately is has been attached to my old Skyways Chippahawk, giving exellent service .  Cheers FB3

[Balsa plan for foam board]

WoW, some of these models are amazing. Would love to have a go at a sports model sometime.  Been building from plans for 30 years, never bought a kit. A plan, sheet balsa, some ply and away to go lol. Foam seems a different kettle of fish.  Iknowthat my models fly better when lighter, so foam maybe the way to go.  Cheers FB3

[MDS 58 pro knowledge sought]

I have a super scorpion built in the seventies.  It has an MDS 40 fitted.  Still flying today, starts first time every time, and has not cut out once after years of flying.  At the time of the great MDS  debate I was told these engines up to a 40 were good, larger ones not so.  Cheers

[Laser engine ID please]

Wonder if someone could id this engine. It’s over twenty five years old, not used a lot with very good compression.  Thanks FB3

[Flyskyi6 set up question]

Good idea GG. Since I have not programmed anything yet I will not lose anything. Thanks

   Thanks Max for the info.

[Balsa plan for foam board]

Hi Ron, thanks for reply. Did you follow the plan as per cutting wing ribs , firewall, etc, or did you cut slabs of foam as per the flat wing KF designs ? Cheers

[Balsa plan for foam board]

Hi all, have this idea for Winter build lol. Can you build a foam model from plans for balsa ?  Cheers FB3

[Flyskyi6 set up question]

This should not have been programmed like this in a brand new radio I think.  Sorted now. One strange thing I have got to get used to is the cancel and save button is the same lol.

[Flyskyi6 set up question]

Just checked progg.  In “mix” for v tails it gives the following.  “V tail on,  channel 2 -50%, channel 4-50%.”  Perhaps it should show Off ?  Cheers

[Flyskyi6 set up question]

Hi Frank.no I haven’t. This is my first 2.4gh radio, and I am just getting to grips with it. Only arrived a few days ago. Will have a look into the programme to se if there is some thing coupled in the “mix” section.  Thanks

[NiMh batteries]

Hi Frank , how do you put a load on them on the bench ?

     Hi David, very sorry to see the model come to grief. Bet it was a great flier too.  Cheers FB3

[Flyskyi6 set up question]

Hi all, I swapped gimbals to change from mode 2 to mode1 and sorted stick mode. Checking “display”I found when I used rudder, display shows elevator moving too. Is this correct ?  Thanks FB3

[NiMh batteries]

Hi all, due to Covid, bereavement and other reasons I have not flown for nearly three years. My Rx batteries are charging well nut must be five or six plus years old. I think I need new ones ?  Cheers FB3