-
Posts
896 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by flight1
-
-
In the world of declined model magazines i have just come across this new mag RC Scale International looks very interesting and I might give it a go.
It is dedicated EXCLUSIVELY to prop driven scale models and scale gliders of all eras so if your into that it should be good.
-
Yes there is often confusion between the RF side of things and the software that does all the mixing etc.
OpenTX is the operating sytem software that operate over multple platforms(transmitters from different makes etc).
on the Rf side in the rc world there are only a few RF chips are used and many manufactures use the same ones. these are designed to transmit/recieve) on the 2.4Ghz band and this is ware the word protocol comes in and this is the firmware comes to play with each manufacturing using its own format of coded data packages to be sent/recieved which contain the info needed for each control.
I don't know if you can own a protocol' out right as so much of it's code is in common us, they all just using a coded pin to keep it in 'house'.
it's all so complicated
-
I wasn't directing anything personnel just generalizing, just because a post is just below one's own dosent mean it is directed solely at that post and the person behind it. sorry for any confusion
-
Posted by RAYMOND MCMASTER on 21/01/2021 11:37:53:
I'm not sure about the purpose of the rant but thanks maybe I'll get an answer
I wasen't ranting I'am just a forthright person
-
Well its not hard to find the conformity certificate, the problem with doom/nay sayers they never stop to check facts first and spread false uncertainties to make life harder
here is a link to the right page just download and view the right document for your needs
Edited By flight1 on 21/01/2021 11:23:23
-
if you not seen it DS world speed record 548 Mph !! spot it if you can keep up
-
Well you can't beat laser cutter for accuracy and ease.
Hving said that I've got a scrol saw and I find it hard to track a line, but when I tried a band saw it was a lot better so when funds allow I will get one.
good quality blades make a differance and you can stack the wood up to make multibles with all cut matching
-
Posted by Frank Skilbeck on 17/01/2021 22:24:42:
Practical rpm range 2,500 to 18,000 rpm, that should sound good,
18000 rpm on 30cc who's dreaming and it should be under 82db too!
Practical rpm range !! 9000 it should be, but it is the torque that tells all
-
Hi does any one know the changes between the O.S. GF30 and the GF30 II.
I am very curious
-
Church roof! don't we all
Humor asside look for a local roof beeing done and ask for some cut offs , you can melt and cast to the right shape,
Edited By flight1 on 14/01/2021 18:26:30
Edited By flight1 on 14/01/2021 18:26:55
-
I've started using these. had the red one for a year 1/2 and all good. and will be using electronic switches from now on
all have a very small current leakage when off . these types of switches have proved to be very reliable on many devises.
When I have in the past look inside the standard mechanicals rc switch i am not surprised that so many have failures, proberly the biggest cause of crashes next to battery failure not charged (the biggest cause is 'dum thumbs' but no one likes to admint to that, do we?)
-
Well what determines your <250g drone to be a 'toy' under the new regulations because if it is a 'toy' then the only restriction is not to endanger anyboddy etc ??
-
Posted by David Ovenden on 31/12/2020 14:52:52:
I use the bottles of cyno from Tool Station. 1.19 for a 20g bottle of med. viscosity. 50g bottles are 2.63 Last well and works fine for all my jobs.
Flight1 you beat me to it. You type faster than me obviously
Edited By David Ovenden on 31/12/2020 14:53:40
Edited By David Ovenden on 31/12/2020 14:54:12
Edited By David Ovenden on 31/12/2020 14:54:24
ZOOOOMMMM.... and i type with one finger
-
-
Well I asked for no booze anything fattening and no socks as I am to fat as it it. That blew their brains out.
so what did i get?
Cognac
Rum
specially fataning cookies
Sweets selection
nice wok
le creuset pot (oven /hob) very nice
Indigestion
fatter waist line
all so merry!
-
Well Pete
i think i can hear a conorous across the glob with that sentiment, but we need rational thoughts/decisions from government and some scientific bodies. pumping everbody full of fear is not one of them.
enough of all that best new year wishes for one and all
and considering the weather may this blow you into the new year
Edited By flight1 on 26/12/2020 23:09:47
-
As for building board i have used plasterboard which is efective and cheap enough to be replace with each model build and as always a strong stable and flat bench for it to be placed on, which a good scrap piece of kitchen worktop of suitable size works well.
But I have just bought some magnets and am going to try a metal /magnet one (ferrite channel magnets x40 to start)
the guidance i am going to use is from these two sites
and
merry Christmas all
Edited By flight1 on 24/12/2020 20:35:27
-
hi yes please, count me in
-
ok light me up hopefully
-
I move accounts 5 years ago from a rather archaic natwest account to barclays very easy.
you can set up your smart phone for online banking which work very well and qicker than using a Pc and it has the fuction of paying in cheques as well which requires taking a picture of each chequre . been happy so far
Edited By flight1 on 20/12/2020 11:26:29
Edited By flight1 on 20/12/2020 11:27:08
- 1
-
Please as well
-
merry please
-
You can use balsa loc or dulux version or if you want oracov heat adhesive
and for dope Guild materials non shrinking dope should do the job
edit there is also this balsa bond
Edited By flight1 on 17/12/2020 16:52:51
-
yes please
New specialist rc scale mag
in Scale Matters
Posted
don't need to subscribe, can buy one at a time so I might either buy the current printed mag to see or give the digital version a go as I have RCME on a digital subscription which works ok.