Trevor Grace 1
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by Trevor Grace 1
-
-
thanks everyone
-
Just finished setting up he new build but when i turned of the Tx to unplug the battery the motor/prop started rotating.... how and why could this happen.
-
after many years of oily planes followed by the leccys, decided i have wasted and ignored the amazing hills and coastline around here,so. a gliding we shall go.
I have almost finished the fuse (late 1940s type from a couple of old pics and a small outline drawing)so not very scale but looks a bit like it.
Now for the wing about and this is where all you glider guys can help, its about 96" span and 10.5" constant cord except for 2-3 ribs either end which tapers of to a rounded tip. I think i will go with a flat bottom renalds as opposed to anything to tec simply for ease of building so would you build washout into a wing of this type or not .
ps i was born about the same time as the beast so looking for a fairly steady eddy......
-
so can i safely use DSM2/DSMX and also DSMX/DSM2 with my old DX7 tranny.
-
well done that man (Denis W.)
Major prob trying to find DSM2 Rx.
-
I have seen this term when looking for DSM2 Rx as opposed to DSMX.
-
what is forwards or backwards compatible as in receivers !!!!!!!!!!!!!!
-
cant believe where this has gone,think its time to close it.
-
so, i have got an old DSM2 DX7... how do i cancel one of the Rx's and give it a new number.
-
have just plumbed in a new Rx into a new plane and inadvertently used an existing plane number. Ok lets take the prop off and see if they both work...YES they do.both planes will run together..
-
not sure where you are with your last post Denis.
PS your views on contact cleaner !!
-
Hi Denis, what "up & down" switch are you referring to.
-
thanks Denis, will try new switch
-
So, cant afford a new one .......Charged overnight -OK
Switched on-OK
Lights up-OK
Works throws on last prog entered-OK
Trims working-OK
WILL NOT ENTER ANY OTHER PROG.
-
think my tranny just died,charged overnight ok, turn on lights up, nothing else working, very old has done well.
-
trims ok just up & down buttons
-
yes but its landing on R every time.
-
trying to set up the end point adjustment on ailerons but the curser refuses to land on the left hand wing servo in "end point adjust" window
-
What is SBUS ????
-
Hi everyone, Thanks to you all for you help and and answers. Especially to Denis Watkins. After a long time out of flying i thought any DSM Rx was ok. Have now dug up an old DSM2 and it went straight in. LESSON LEARNT thanks to a great forum.
Merry Xmas all,
Trev.
-
Many THANKS Dennis i will check them out.
-
Hi Dennis, def got DSM2 on the front +plus found a date on the box 2007
-
not sure what orange bars your talking about !!!!!! never seen any!
-
Hi Denis,voltage reading 10.3 all sticks inc. throttle stylus have got full travel. now refuseing to work new receiver full stop..
low revs
in General Electric Flight Chat
Posted
i have 4 dif motors in dif planes and they all seem to be running at less than max revs, is it pos i have messed up with my Tx or !!!!!!!!!!!!!!!! (dont think i;m imagining it)