Jump to content

Alan Gordon 5

Members
  • Posts

    51
  • Joined

  • Last visited

Posts posted by Alan Gordon 5

  1. Hi guys

    This is for anyone who has built a DB Sport and Scale Barnstormer 72. Just looking for an indication as to what the tip dihedral should be ? I propose keeping it simple by keeping it Rudder only.

    I suspect around 3.5 " but would like confirmation.

  2. A big shout out to J Perkins Distribution, The issue I had with binding my Aurora 9 has now been resolved thanks to advice and help from their service department, Excellent service. ( I have no connection with this company apart from being a very happy customer)

    • Like 1
  3. Thanks Steve, I8 was coming to that conclusion I only used it once and had to store due to Covid, it simply wont bind now. So I reckon it is the Tx or the Module. 

    I am going back to 35 mg

  4. Well gentlemen here is an update on the efforts to get my Aurora 9 to bind. I replaced the Rx and the TX battery but still no go, so I am wondering if there is a Service centre where I might send this set to be looked at professionally ? 

  5. Thanks Denis I will keep on trying, Honestly my real problem is, if the RX turns out to be faulty then it became faulty while in storage !!!! My workshop is warm and dry and the radio set was put away in its original insulated carton. When I came to unbox the radio and test it, it did not work so I tried to rebind with no success hence the forum posts.

  6. This is problem there are no lights what's so ever. If I plug the Bat into the other sockets then the LED lights up Red but when into the Bat socket there are no lights neither Blue or Red, what's concerning me is the fact the system was used once then I had to put back into original box for storage. the Rx is the Optima 7.

  7. Hi Folks, My Aurora 9 has been in storage for approx one year, and I have used it one once before putting it into storage. However I have come to use it again and it simply wont link up the Tx seems ok and does what it is supposed to, but the Rx has no life I am using fully charged batteries and again I am following the instructions but still no go, any ideas on what might be wrong would be gratefully received. 

×
×
  • Create New...