Jump to content

Stefan Hafner

Members
  • Posts

    395
  • Joined

  • Last visited

    Never

Posts posted by Stefan Hafner

  1. Looks good CS, I'd agree with David, 2 servos are the way to go if you want to go for aerobatics, it'll give you the freedom to add differential and other mixes too.

    You'll find the Edge style wing will be less prone to tip stalling as it is effectively a forward swept wing, but if you're not using too much of a taper that won;t cause any major issues anyway.

  2. Looks interesting Simon, I've been tempted to do something similar but bigger, when my wallet allows me cheeky

    Regarding stability, what about simply having the batteries mounted lower down the fuselage if you have any problems, may improve things somewhat?

    Interestingly, I read somewhere that the reason for the anhedral was that the original design was too stable so to compensate they added the anhedral.

  3. If you wanted go down the foam road (no pun intended), have a look at **LINK** for cutting wings, he did a set for me a few years back, that were spot on, and good price too. I finished them almost as described in my post above but with balsa and glass instead of ply and carbon. I did it by laminating on the first layer of glass and cloth and balsa then just putting the core back in the outer shells and applying lots of weight, then added the leading edge and glassed over the whole lot and sanded. Crashed the plane recently and broke the fuselage in 5 places but the wing just had some minor scratches, and I would guess that wing cost me about £60 in total.

  4. I did suspect it was for a car from the pic above wink

    Are you talking about making from a solid piece of wood or as a built up wing?

    Personally i think you'd be better with a foam cored wing with a hardwood leading edge and an aluminium trailing edge.Then fibreglass the whole lot. Cobbled together a quick ProE model to give you some idea of what I mean.

    I think this would be more ding resistant than a built up wing, as you could use blue foam or even pink foam for the core, these will give a core that will spring back to the original shape, where as a wooden wing will just crack. The aluminium sheet could easily be filed down to give the correct shape for the TE and will give a harder edge, or if you have the facilities you could lay it up on carbon before bonding it to the core.

    If you want something really strong and you have access to vac bagging gear, the you can make a really strong one. If you take the same core with the carbon TE, then apply a layer or carbon cloth, then add a sheet of 1mm birch ply over that, then another layer of carbon cloth, and shove the whole lot in a vac bag till its cured, hey presto, super strong but light wing wink

    Edited By Stefan Hafner on 30/04/2014 14:56:54

  5. Posted by Phillip Moffatt on 29/04/2014 20:50:50:

    Thanks guys, any thoughts on the trailing edges?
    I'm planning on shaping them from some aluminium strip to give some strength on the wing but obviously it'd be easier to match if they were on the ribs too.

    We built a wing using the S1223 while at uni a few years back for the BMFA Heavy Lift. The railing edges were a bit of a puzzle to work out at first, but we ended up using balsa and glass to give them strength. We started by making a foam template that gave the correct underside profile, then added the ribs and the top skin, then weighted down the whole thing till it was dry. Then we simply sanded the trailing edge to shape and added a layer of glass cloth to the top and bottom to give more strength, applied with epoxy.

  6. As long as you set the sweep value (S on the calculator) to zero the CoG will be correct. I'm guessing you could even use a negative in as the S value to calculate a forward swept wing, assuming the script could handle it.

    You're right in saying that the CoG calculations don't take into account, they are only geometric solutions to find the neutral point, and then you choose your static margin to find your centre of gravity, as the static margin will determine how stable your plane is, the bigger it is the more stable the plane will be.

  7. Well, after having gone to the field yesterday only to find a fairly stiff crosswind that i didn't fancy doing a maiden in, today dawned flat calm with sunny blue skies, so off to the field again i went.

    And the good news is, She Flies !!!! looks like plenty of power and after a few clicks of trim she flies like on rails. Had a very nice flight, then went for a second one, where the engine cut on me just after take off, so put her down in the neighbouring field, no damage don, but the a bit of soil got into the carb so decided to leave at that and clean out the carb properly at home, better to be safe than ruin the engine. pretty sure she was just running a bit too rich and is still bit fussy as its only had about 3 tanks of fuel through.

    And here, a few pics (screen caps from the video)

    Will get a wee video made over the next few days

  8. Ran the engine in earlier, oh the lovely oily mess cheeky but what a lot of power, certainly not going to be lacking in that department laugh

    Annoyingly the battery I was planning on using for it was pretty dead, and no amount of cycling it would bring it back to life, so new one ordered, but means the maiden flight is delayed

  9. Well, its almost there now, after delays with making the canopy due to not being able to get the right materials out here in rural Spain, I've almost finished the canopy now, just need to spend a bit more time sanding and lacquering, then pop on the canopy and some trim lines and it as good as ready to go, fingers crossed I'll have it done this week

  10. Stiffness is only one part of the story, carbon is much lighter, so impact will have a less momentum behind them. As RGP says, either will break in a proper crash.

    Remember, carbon is a superb RF shield so 35mhz needs the aerial outside the airframe. Not a problem with 2.4 though

    Personally I'd go for carbon, even if it is more expensive, just looks so cool too wink


  11. Just a wee update, i've been working on on this, just forgot to take photos as i went. The sheeting has been done and the covering is on, just need to add a few bits of trim here and there, and the servos are in too. The cowl is as good as done, as is the engine mount.

    Annoyingly, while making the mould for the canopy, it stuck to the positive and i ended up with some of the primer stuck to the mould. I suspect this was because the primer may not have been 100% dry and the solvent interacted with the wax and made it stick, despite having put on 6 layers of wax. After a few choice words i worked out a way to salvage the mould, so i've been giving it some time for the primer thats stuck on to dry , then i'm going to sand as much of it off as i can and prime the whole mould, then sand that back to a perfect finish that i can then wax up and make the part from.

  12. Colin, when you put the engine back on the test did you use the same tank as in the plane? Could be a problem in the tank thats in the plane if you used a different one on the bench. I know i've had problems caused by the klunk line, where it had a small hole in the line, then when the fuel level in the tank dropped below the hole it started to draw air too and messed up the mixture.

×
×
  • Create New...