Dave Towell
-
Posts
217 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by Dave Towell
-
-
Did no one else realise the date as the 1st of April or is that just me?If I'm wrong..... (and I often am!!!).... then I'll be getting an iPhone then.
-
I Know What you are saying Ultymate about the fact that pritty quick, if you do get into the hobby you will need a better Tx, but for £40 for your first Tx and Rx on 2.4 it aint as if you are forking out too much. The only issue i can see is as a first Tx, while you are learning, is the need or facilaty for a buddy lead and is it compatable with any of the other sets ie buddy lead to fuby or speky?Only time will tell if its 1. any good2. will stand the test of timeYou never know they my have a 9Ch set out in june for .........£60..................................... would be nice but I doubt it.
-
I don't go online for a few hours and look whats happened!2.4 on fuby can NOT be shot down by some one else as the tx and rx are bound to each other by codeing and its the same codeing for each rx wether 1 or 25 from the same Tx. so me turning on will not interfere with bob's 2.4 fuby or specky next door.Back to the topic in handSpoke to Gary at Galaxy in ipswich today (great shop. go if you can)and asked him about this new planet range of 2.4. he has tested the set in a elec gliuder till a spec in the sky, and in a ic fun fly type and both flew to well beyoned what he called "normal flying range" and the manufacturars are stateing that it IS full range. even got to hold the one in the shop and it feels well............ like any normal TX. so for £40 all in for shockies and the like, hell even a decent sunday hack what more could you ask for?
-
Apparently not, a fellow club member flew the wrong model last weekend using fuby's new FC 10.The model was not responding well so he landed to see what was wrong, luckuly throws went the right way ,he then noticed the the name on the screen was diferent.Switch memorys over to something else and servos responded then switched to several diferent ones and they ALL responded.To say he was anoyed is under statement he was led to bebleleive that this could not happen on 2.4 but "model match " is a copyrited speky facilaty.This is one of the reason I bought a speky DS7 two days ago!Must ask though, why oh why does the weather always suck just after you buy something new and want to try it out!!! or is this just me?
-
Thinks its the new set called PLANET and at £40 all in not to much of an outlay.
Just to clarify a piont its ONLY speky sets that have model match. that what sung it for me crashed one to many (one) when on the wrong memory.Am of the galaxy tomorrow and will ask them as I know they are stocking it.
-
Back in may 2000 ( I think) there was a plan for a .25 ic low wing plane made from cardboard and I'm sure it was called the cardshark. I think is was desigened by Mr Ashby Senior ( Maurice I'm sure its spelt wrong sorry)Did anyone build one, and did it fly well? was one on my to do list. But as i was learning at the time and with work and family time just sliped by and other ideas came to the for and took over. love the idea of cheap building materials especialy in this "credit crunch" time.
Edited By David Ashby - RCME moderator on 25/03/2009 10:46:14
-
Went and watched them in London last year, and the practice day was the better day to watch as they all had a couple of goes each very inpresive. If anyone ever gets the chance to watch it then go its well worth it.
Edited By Dave Towell on 24/03/2009 18:09:11
-
I know a few guys with Iphone and will ask them. I know one on of the uses the level on his iphone as his wing incadence meter and says its is more acurate then the older ones with the leveling bubble.
Edited By Dave Towell on 24/03/2009 18:02:25
-
Let us all know how you get on am planing to build one in the not to distant future (might have to get a back issue as well) And would be interested to see how you get on.Good luckTher is also the plans special (David you missed that one!)
-
...............AHMEN..........!!!!
-
I can't remember the last time I saw an artical that was MF (subscriber only). haven't found one since the change over in jan to the new site layout.
-
Never noticed hot glue going soft in the summer. will have to keep a eye on that in the summer. Mind you when was the last time we had a summer?????????
-
What about adding a section on the web site that gives you the links that are in the magazine?For example:- Alex W's indoor artical (in the new March issue) mentions a site to get a free plan for an indoor plane (a epp sumo). Why not have a section that lists all of these and all the other links, the manufacturers that make the kits that are reviewed and so on, you get the idea.Now I may be asking/suggesting for something that already exists but if it does I cann't find/see it any were on the site. So if it does can someone tell me were it is, and if not what do you think Mr Ashby and Co?????????
-
Found a cheap heat gun at one of our local diy store, reduced due to no carry case but worked fine and cost less than a tenner!, and it works just just don't start to close and as they say " test on a scrap bit first" !!!!! I've never had any probs.
-
1. Seafury2. Edgley Optica3. P-38 lightning
-
Hot glue is all I use on depron it works realy well dosn't add to much wieght as long as its not over used. I put servos in with the stuff, just tape round them first so you can remove it later. just becareful not to use to much near any joint you want to sand as it do not sand very well.
-
Just use some of there glues. they had 2 difrent types so got a small bottel of each just to try them out after hearing so much about them thought I'd give it a go. so decided test them on test pices of scrap balsa, depron, plastic and metal (dural scraps).OH MY GOD!!!!!! SETS LIKE ITS BEEN TIG WELDEDOnes a clear liquid looks a bit like super glue the other one is a brown gloopy thing and looks a bit like a strange contact adhisive. Technical descriptions aren't they! They set so solid its amazing. Some seped out onto my NEW work bench and could hardly get the thing off. there is no way that the glue joint will fail, the wood will fail first.will use them again excellent stuffjust wish the curing times a bit quicker.
-
Thought of another oneGreen Air Designs, can not find details they are not web site but its somewhere near norwich.
-
Dont think focus going bust, but if it is, best I buy a decent stock pile of the stuff then!!!!!!!
-
Don't know of this is in the right thread but.Gorilla Glue is now avalibe at FOCUS diy stores. Just came in yesterday to my local store and apparently is a new line they are all going to stock it. Just thought I'd let people know.
-
Mr muscel is good the best one has got to be there " Mr Muscel orange oil degreaseant" works briliantly and smells good in the car on the way home, or go electric thats what I'm doing not because of the mess just a noise issue at our fling site.
-
I know this is about B&Q floor foam but and ideas if you could make a nutball out of epp foam I gessing yes but just checking.
new to this small electric lark and am LOVING IT simple, cheap, and FUN. what more do you whant from a model. well unless its a 1/4 scale B-17 with workong bomb release and landing lights etc etc etc etc........ but you know what i mean!!! -
Thanks for the links should keep me busy and out off trouble!
Well at least till I start flying the thing!!!!!!!!!
Thanks again will read and watch both things on you tube with interest.
-
Must have plan and spec for Nutball !!!!!!!!
They look so cool and just right for indoor. Any info would be great, bets the usual shockies and miniums. Not that there is any thing wrong with them it's just one of these would be a nice change.
What motor, prop ,and esc did you use etc etc etc etc.............................
Budget 2.4Ghz FHSS for under 40
in Other Radio Brands
Posted