[Tony Nijuis A10]

It is covered in grey film from Hobbyking, the painted parts of the nacelles are from a Tamiya rattle can.

The decals are from the E Flite A10 they can be obtained as a spare part.

Pilot is from Motion RC

Hope this helps,

Bill

[Lacquer for painted foamies]

Thanks for that I will check it out

[Lacquer for painted foamies]

Can anyone recommend a lacquer to spray on foam models?  

[Forum members' new models: Let's see them.]

Just completed a couple of test flights all seems well , just a couple of trim tweeks. 

I enjoyed the build, covering was a challenge   

[Tony Nijuis A10]

I flew mine last week it is very fast !! and sits really nicely when flying straight and level

I made a skid to rest on as I was worried about the durability of the fins.

The comments re the elevator throttle mix is very useful as when throttle is closed there is a significant pitch change.

[Tony Nijuis A10]

Has anyone built and flown one of these models?

[Cloud Clipper]

Hi Steven.

I built the Cloud Clipper earlier this year.

It was a very easy to build kit for anyone with some experience of balsa bashing!

All the materials where of good quality and sufficient quantity.

I chose the electric version, I added a doubler to the firewall to get the motor further forward but it still needed lead in the nose to get the C of G correct.

I also used a 2200 4s lipo stood vertically behind the firewall.

I bought mine from Kings Lynn model shop but I see Century UK have them listed.

Hope this helps, Bill

[Balsa cabin Sonata]

Thanks guys for the info, on further inspection it appears that I have both the glider and the E version.

There is no apparent difference in the parts but without a plan to refer to it is difficult to say.

My preference would be to build the E version.

[Balsa cabin Sonata]

I have been given two old Balsa cabin Sonata kits, sadly there are no plans with either.

Does anyone have a copy of the plan that I could buy/borrow or copy.

Bill

[Kyten from Sarik plans service]

Thanks for that guys. I ordered the plan and laser cut wood pack at the weekend.

I am just waiting on delivery!

[Kyten from Sarik plans service]

Info at Sarik says it is for pusher or edf I will check with 4 Max for the appropriate edf unit

[Forum members' new models: Let's see them.]

The Fournier is ready for covering

[Forum members' new models: Let's see them.]

A pic of my Cloud Clipper from the Value Planes kit it flies beautifully on electric power.

[Kyten from Sarik plans service]

Has anyone built one of these models from the Sarik plan.

I believe it was originally an RC Model World plan, not sure if it was a freebie or a feature?  

 

 

[Building my new Fournier RF-4]

Thanks very much.

Have you flown your Fournier yet?

Bill. 

[Building my new Fournier RF-4]

I have started to build a Fournier from the free plan and Sarik laser cut parts I wanted to ask Pete what type of wire he used for the the nose leg.

The Sarik parts go together very well , are very accurate and of good quality balsa.

 

Bill

[Phoenix models 50" Tucano CS build.]

Thats great, I am taking my Chipmunk for an outing this afternoon.

All the best Bill.

 

 

[Phoenix models 50" Tucano CS build.]

I have built one of Stans Chipmunk kits  it all very straightforward for any one with experience of traditional kits.

The Tucano follows the same build process.

If you log onto Stans site you can see a copy of the plan and instructions which  I found very helpful

[Forum members' new models: Let's see them.]

My Pete Miller Rans S9 just waiting for Boris to give me permission to fly it!

[Rans S9 chaos]

All finished ! Just have to wait for a test flight, not long now. 

[Cloud Clipper]

I have bought one of these I will be starting the build soon. It appears to be a well thought out kit with an option for i/c or electric.

Usual laser cut parts and a forest of balsa strip.

I will post some photos when there is something on the board.

Bill.

 

[Model flying photos you're proud of]

Tony Nijuis 63" Spitfire back from another patrol.

[Rans S9 chaos]

Model is almost ready to cover.

I have looked at the photos in the RCM&E and you seem to have a pretty decent pilot in your model can you tell me where you got him from?

[Peter Iliffe]

I never met the man, but what a loss to aeromodelling.

Such creative genius is hard to find these days.

Condolences to his family and friends.

[Rans S9 chaos]

I am making four as suggested 2 x 1/4 wide 2 x 3/16.

The wider ones will support the centre section and the others the front and rear sections.

The narrow ones will be chamfered to accommodate the angle of the screens.