john Wilson 1 Posted May 5, 2010 Share Posted May 5, 2010 Does anyone know of either a source of simple (cheap) wheel brakes or a way of constructing something simple and reliable. All those I have seen are for jets and cost more than one of my models I have just joined a club with a tarmac runway and I have difficulty stopping the model after landing! I have tried adding friction to the wheels but this aggravates ground-looping tendencies in cross-winds. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted May 5, 2010 Share Posted May 5, 2010 Alex Whittaker did a feature on this very thing in the mag a year or two back. Quote Link to comment Share on other sites More sharing options...
Solid Snake Posted May 5, 2010 Share Posted May 5, 2010 Would a drag chute be practical? or have a servo close to the wheel and have the arm move against the wheel when needed forgive the badly drawn diagram Edited By James E on 05/05/2010 19:44:18 Quote Link to comment Share on other sites More sharing options...
john Wilson 1 Posted May 6, 2010 Author Share Posted May 6, 2010 Thanks Timbo, I've found it in the april 2007 issue. Typical Whittaker - down to earth and witty. john Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted May 6, 2010 Share Posted May 6, 2010 Ah good, I was slightly embarrased at not being able to remember which issue Quote Link to comment Share on other sites More sharing options...
john Wilson 1 Posted May 6, 2010 Author Share Posted May 6, 2010 OK, well in case anyone else asks there is also a bit in the june 2002 issue, by the lovely Brian Winch (meant sincerely - he has taken the trouble to answer my e-mail questions several times) which describes a more complex system. Thanks to you, Timbo, and the downloadable index files. john Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.