blake guyan Posted June 5, 2010 Share Posted June 5, 2010 hey guys. i just set up my trojan, i soldered on my shiney new deans and i was looking to get to binding the TX and when i went to connect up the bits i found that my servo connectors dont fit into the gap in my 7chn RX... they have beveled holes but my connectors dont have beveled edges. i read it was just a case of sanding the edge down... is that true or is there something else im missing?(PS i know the DX6i iss a 6 chan TX but i got the 7 anyhow ) Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted June 5, 2010 Share Posted June 5, 2010 there is no problem in cutting off the excess plastic to fit Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 5, 2010 Author Share Posted June 5, 2010 ace thanks. also. is there some way oif knowing which way i want to plug them in other than. get them to fit and hope for the best? Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted June 6, 2010 Share Posted June 6, 2010 they must go in the correct way Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 6, 2010 Author Share Posted June 6, 2010 yeh i got it all hooked up :D thanks for the help. Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 6, 2010 Author Share Posted June 6, 2010 ok now i solved that problem i got a brand new one. everything hooked up ok. but i have binded the trojan and im finding the Y harness on the wing servos is causing me problems. i have a DX6i and its not liking it one bit. it takes on the left hand servo but not the right. i cant seem to get the right servo to work. anyone know what im missing? Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted June 6, 2010 Share Posted June 6, 2010 Shouldnt be a problem. have you tried each of the two servos separately - and confirmed they are both OK. If so, then it sounds like you have a dodgy Y lead. Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted June 6, 2010 Share Posted June 6, 2010 if one servo is working this show the tx and rx are ok. first thing to check is the y lead itself and the servo that does not move. you could start by swapping the Y leads connections over and see what happerns. if the working side changes over then you need a new y lead if it is the same test the non moving servo Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 6, 2010 Author Share Posted June 6, 2010 im gonna go test it now. just to point out that if i try and force the servo the servo is resiosting, so its doing sokmething. ill try out your sugestions. thanks guys., Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 6, 2010 Author Share Posted June 6, 2010 ok. i tested it out. swapped the y leads connections its always the left aileron that moves. also sorry about the last repy it was done on the move Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 7, 2010 Author Share Posted June 7, 2010 ok. by using alot of testing. its down to a dodgy servo. looks like the lhs will give me a replacement :D hoorah Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted June 7, 2010 Share Posted June 7, 2010 Thought so. In the majority of problem solving cases in this game, logical "one thing at a time" process of elimination methods, is the way to go Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 7, 2010 Author Share Posted June 7, 2010 just a shme,m was looking forwards to getting it up in the good weather. Quote Link to comment Share on other sites More sharing options...
blake guyan Posted June 8, 2010 Author Share Posted June 8, 2010 :D all sorted now the l;ittle feller is all up and running. looks like a bad stretch of cable did it. its all fixed and ready to go now though :D thanks for all your help guys :D youve been fantastic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.