Yorkman Posted August 4, 2010 Share Posted August 4, 2010 dug out my old Robbe(?) Mustang from 10 years ago which flew like a brick on a speed 600 and nicad.... what size/kv brushless motor/esc will bolt straight in there and do the same (or far better) job-using a 3s lipo and 9x6 prop? (preferably an inrunner so I don't have to modify the airframe) ooops might help if you knew it's about 42" span and weighs about 2.5lbs (I did say it was a brick!)Edited By Yorkman on 04/08/2010 17:40:01 Quote Link to comment Share on other sites More sharing options...
Reno Racer Posted August 4, 2010 Share Posted August 4, 2010 Yorkman, Please see link here this should do it. Have you flown from Urchfont lately? Quote Link to comment Share on other sites More sharing options...
Yorkman Posted August 4, 2010 Author Share Posted August 4, 2010 Good link Chris, thanks! Flew the Bombay at UMFC Friday before last and will hopefully be there this Friday 4.00-4.30 for a couple of sorties, weather permitting. Will I see you there anytime? BTW, flew the 'stang yesterday on an old speed 600 I found in dad's box of bits and a 25 amp esc...and halfway through the 2nd flight it all went quiet........my deadstick landing was actually better than the planned one.. Quote Link to comment Share on other sites More sharing options...
Reno Racer Posted August 4, 2010 Share Posted August 4, 2010 I will try and get over on Fri. I have been flying at the Flying Druids Club near Stonehenge (fantastic strip). Only got 3 weeks left in the UK. Posted to US, but transit for our stuff, including my aircraft is 6-10 weeks, so a huge gap in flying; I've been flying almost every other day until recently - Packing, preparing and stressing seem to take up most of my time presently. Its much easier to fly from UMFC than take the 30 mins drive to my Club strip. Can I fly at UMFC at anytime? BTW, as part of my fleet reduction for the move, I recently sold my electric converted Mk3 WOT4 to Mike at UMFC. Small world! Quote Link to comment Share on other sites More sharing options...
Yorkman Posted August 4, 2010 Author Share Posted August 4, 2010 Ah! I've heard Mike's been having some....fun!...with that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.