Tim Mackey Posted November 23, 2010 Share Posted November 23, 2010 Nice write up Chris - just get a bod in that big open office now Quote Link to comment Share on other sites More sharing options...
Chris Card Posted November 23, 2010 Share Posted November 23, 2010 It almost got a profile photo of David Ashby stuck to a cardboard template as a pilot, but I couldn't find a suitable shot in the magazine to scan in and enlarge to suit. Quote Link to comment Share on other sites More sharing options...
Andrew Smith 5 Posted November 26, 2010 Share Posted November 26, 2010 Good and interesting write up, Looked at mine in box, cant wait till Christmas to start the build, agree on the quality and good point about leaving 1mm gap for ailerons/elevator. Ive been reading the down loadable manual, for cutting the ultracote for stab manual says you can use solder iron, i presume they mean solder iron with hot knife attachment. This will be my first balsa build, and have been researching the ca hinges are they up to job, And any other build tips will be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.