kevin lewis 2 Posted March 5, 2012 Share Posted March 5, 2012 Could anyone help with a qustion I have, is it possible to take theBL motor /esc-receiver board and 200mah lipo from a parkzone micro stryker and put into a electrafly mini slinger -as the mini slinger is heavier would this slow things down or cause a burn out . You guessed it the micro styker was a bit too lively for me Many thanks Kevin Quote Link to comment Share on other sites More sharing options...
Steve Hargreaves - Moderator Posted March 5, 2012 Share Posted March 5, 2012 Hi Kevin & welcome to the forum!!! I don't know either model so can't comment on them directly but the only part that has a real bearing on the current drawn is the propellor.....keep the same prop & it will be fine...the motor/battery/esc doesn't know what model it is fitted to so a change in model will not make any difference. Whether the set up has enough power to fly the Mini Slinger is a question I can't answer but if the models are similar size & weight then I should think all will be well... Quote Link to comment Share on other sites More sharing options...
kevin lewis 2 Posted March 5, 2012 Author Share Posted March 5, 2012 thanks steve the mini slinger is heavier and has a larger wingspan but was hoping this would fly much slower with the same power setup as the micro stryker flew at around 80mph which was a bit much for me. kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.