Dennis Jones Posted August 26, 2012 Share Posted August 26, 2012 Hi for the second time a club mate crashed his acro wot e the first was a riteoff this time just broke the motor shaft, can anyone tell me were he can get one or what motor the acro wot has fitted I know it is a 35 but not size or kv thanks for your help. Dennis Quote Link to comment Share on other sites More sharing options...
Simon Chambers Posted August 27, 2012 Share Posted August 27, 2012 I bent the shaft in my Wot4 Foam-E - which I believe has the same motor as the Acro Wot - well both have the same diamensions anyway. I used this shaft and it fits perfectly - even down to the grub screw flat: **LINK** You'll need to get another 4mm circlip if you've lost it though, as its not included with the above shaft. Should be easy enough to get one down a motor factors/hobby shop/etc though. Cheers, Si. Quote Link to comment Share on other sites More sharing options...
Dennis Jones Posted August 28, 2012 Author Share Posted August 28, 2012 Thanks a lot for that, he has ordered a few I cant believe how thin and soft the shafts are, found out its a 3236-870kv Thank you again dennis Quote Link to comment Share on other sites More sharing options...
simpson j Posted August 28, 2012 Share Posted August 28, 2012 Hi circlips at modelfixings .com john Quote Link to comment Share on other sites More sharing options...
Dermot Gallagher Posted October 31, 2013 Share Posted October 31, 2013 Are you 100% sure those Hobby King NTM Prop Drive 3536A Series Replacement Shafts are a direct replacement for the stock motor? If they are they're terrific value, and I'll buy a few - the shafts are very soft indeed. Is there much work needed to open the motor and fitting the replacement shaft btw? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.