Flying Mortimer Posted June 29, 2013 Share Posted June 29, 2013 I know that a common issue with the Aurora 9 has been to accidently turn off the power switch while trimming models in flight. My solution was to thread a small cable tie through a short bit of fuel tubing to make a loop and then tie it in the middle with another cable tie. You then need to get hold of a neck balancer and position the fuel tube assembly over the top of the neck balancer as shown in the photos. Hey Presto no more accidentaly turning off the power switch in flight - its easily removable too. . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.