Matt Jones Posted December 7, 2013 Share Posted December 7, 2013 Good work John. Nice video too but can see why it was removed Quote Link to comment Share on other sites More sharing options...
john melia 1 Posted December 7, 2013 Author Share Posted December 7, 2013 cheers matt , any thought on enlarging the elevons the full width of the span , like I say its very lazy on aileron input . It was pretty windy today as well so more aileron response would have been handy Quote Link to comment Share on other sites More sharing options...
john melia 1 Posted December 8, 2013 Author Share Posted December 8, 2013 Heres an edited video squeaky clean , the maiden of my delta force 1 which I really didnt think would have flew Quote Link to comment Share on other sites More sharing options...
john melia 1 Posted December 8, 2013 Author Share Posted December 8, 2013 As you can see in this photo , I wasnt very happy with my original paint finish , I sprayed thinned varnish over the red , and the varnish began peeling off like sunburnt skin after a week , so I've rubbed it down , cut the sig koverall out of the unsheeted areas because the paint started to crack , my question now is , Can I respray over the surface I have rubbed down , or will I need to prime it all again , its getting resprayed the same colour red . The unsheeted areas are going to be covered with solarfilm . Edited By john melia 1 on 08/12/2013 16:02:45 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.