Gary Binnie Posted June 3, 2014 Share Posted June 3, 2014 I know the 'no lift and going down' feeling well! I would guess that the upwards warped outer panel trailing edge is deliberate washout, quite common on gliders (and Spitfires!). It's quite possible that the ailerons should match the section and not line up with the flaps. Not heard of those servos, a popular wing servo (digital) is the Futaba S3150 or its high volt version, the S3172SV. Hitec are ok, HS 125MG for wings. Cheers Gary Quote Link to comment Share on other sites More sharing options...
Tom Satinet Posted June 3, 2014 Share Posted June 3, 2014 Wind lateral balance would have to be way out for it to make a big difference on a polyhedral model like that. Most likely one or both wings are warped. And/or the control surfaces. Edited By Tom Satinet on 03/06/2014 09:40:16 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.