Martin Whybrow Posted June 24, 2014 Share Posted June 24, 2014 I was given this heli by a friend who found it in the house they just moved in to. It's the original version, 35MHz and is complete, the LiPo even took a charge and seems healthy. On connecting the battery, with the Tx on, I just get an alternating flashing red and green light on the receiver / speed control / gyro module (it's the EK2-0702 module). Does anyone have any instruction, either for the heli or the Rx module? Quote Link to comment Share on other sites More sharing options...
Wiltshire Flyer Posted June 24, 2014 Share Posted June 24, 2014 **LINK** dont know if that's of any use? Quote Link to comment Share on other sites More sharing options...
Wiltshire Flyer Posted June 24, 2014 Share Posted June 24, 2014 **LINK** Or this? Quote Link to comment Share on other sites More sharing options...
Barryorbik Posted June 24, 2014 Share Posted June 24, 2014 Martin, Have a look on the "Heliguy" UK site. They have a forum covering most of the ESKY range with lots of hints and tips to get her flying right. Most of the manuals can be downloaded from the main page and they carry lots of spares too but spares for some of the earlier ESKY helicopters are now becoming scarce. Barry Quote Link to comment Share on other sites More sharing options...
Martin Whybrow Posted June 24, 2014 Author Share Posted June 24, 2014 Thanks Barry. Found that I have to register on that forum to read the replies and the registration requires a code which isn't displayed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.