Michael Wright Posted October 23, 2014 Share Posted October 23, 2014 Hi, need some advice please, I've come across a 'Hyperion YAK 55 SP' recently, (38.6" span , suggested motor is a HP-Z3007-26) and I would like to put a brushless set up into it. Has anybody done this or what motor, speed controller, battery would you recommend? kind regards Mike Quote Link to comment Share on other sites More sharing options...
Dave Hopkin Posted October 23, 2014 Share Posted October 23, 2014 The Z3007-26 is a brushless outrunner!!! **LINK** but an expensive one!!! Quote Link to comment Share on other sites More sharing options...
KingKade Posted October 23, 2014 Share Posted October 23, 2014 A quick email to GW at 4 max will have you a good set up to your performance requirements..he sorted me out a couple of times.... K Quote Link to comment Share on other sites More sharing options...
Dave Hopkin Posted October 23, 2014 Share Posted October 23, 2014 4-Max/Purple Power dont list the Hyperion Z3007-26, but they do list the Z3007B-24 The 3007-26 is spec'd as follows: 15-20 Amp on 2-3S LiPo's @ 1240Kv Wattage on 3S - 7x4 Prop = 142, 8x4= 190, 8x6 = 283 The 4-max Equivalent might be the PPPO-2837-1120 details **LINK** here a little slower RPM but a little more torque BUT it depends on what prop you want to use Quote Link to comment Share on other sites More sharing options...
Michael Wright Posted October 23, 2014 Author Share Posted October 23, 2014 Thanks every body! that has given me a direction to go, Robotbirds will probably get an order soon! Regards Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.