Jump to content

Jodel Robin DR400


Sean Murphy 1
 Share

Recommended Posts

Hi to you all, at this ever helpful site. Would you give me your views on what servos to fit on this plane. I am not going to use it for tow that's one less. The manual states 9 x Standard High Torque Servo`s! Do I use different types for steering, throttle, choke & flaps? Or just one type with the same output for example 9 x Hitec HS430BH which I can see a picture of in the manual! I am fitting a petrol OS 33GT engine or gas as its known, with a choke! Is it possible to use an, on & off switch for the choke servo, so it frees up a channel, which I would wire & power independent to everything else? I will link in the servo`s where required with a "Y" lead, to hopefully use a six channel radio.

Thank you in advance, all views greatly appreciated before I go & do the wrong thing!!

Sean.

Link to comment
Share on other sites

Hi to you all, can anybody help me with this? Would you give me your views on what servo`s to fit to my DR400 Ripmax Jodel Robin. It will not be used for towing so that is one less! The manual states 9 x standard high torque servo`s! Do I use different types of speed / output for steering, throttle, choke & flaps? Or should I use one type with the same output for example 9 x Hitec HS430BH which I can see a picture of in the manual! I am fitting a petrol OS 33GT engine with a choke! Is it possible to use an on & off switch for the choke servo? I would power this totally separate & would free up a radio channel if this is possible? I will link in other servo`s where possible with a "Y" lead, allowing me to use a 6 channel radio! So that's the plan any advise would be greatly appreciated.

Thanks in advance

Sean.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...