Richard Haynes 1 Posted July 4, 2015 Share Posted July 4, 2015 I've just got one of these and am still building it. Currently oscillating between a Turnigy Aerodrive SK3 3536-840 and a Turnigy G32 600kv motor with a Turnigy 60amp Plush, and prop s11.5x6 for the one, and 14x7(15x8) for the other, wanting to use 4s 4000mah lipos. Tail weight NOT being an issue with this model, I put Hitec HS82-MGs on the tail, shaving away the extra c.2mm depth that I needed with a Dremel router, and HS65-MGs in the wings. The carbon pushrods seem a bit dodgy. I am NOT building it as a primary trainer. The steerable nose-wheel servo position is... well, stupid I would have to say. I put mine very happily under the battery tray where it is easy to get to. Beginners to this kind of kit, like I was, must beware of too completely trusting the apparent excellence of a kit like this. So,... I had some alignment issues... I'm going to leave them be. Everything fits so perfectly that one assumes it must all be correct, but on my example, it wasn't, not quite. Wingtips to horizontal stabilisers not quite equal, I'm hoping that no one will notice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.