Tom Ling Posted April 11, 2016 Share Posted April 11, 2016 Just thought I would share my thoughts of putting an 1050KV motor in the foam e acro wot. What an improvement, The standard motor is 850kv and I fitted the overlander 3635 1050 and it fits spot on tho the motor shaft is about 5mm longer, batteries are warm, motor is warm but speed controller is lukewarm. Flight time is reduced on my new 3c 2200 to about 6.30 (leaving 18-25 %) but speed is better alongside the APC 11/8 prop but the biggest improvement is it will go vertical from take off and is almost unlimited (until it is very small) very chuffed for about 25 pounds from inwoods and would recommend to anyone with an acro wot or wot 4. Well worth the money. Tom. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.