B O Posted August 29, 2008 Share Posted August 29, 2008 Hi everyone, I'm a new young member to this website and a beginner to the Blade CX2. This is my first heli and I need some help with it! I bought it about 3 weeks ago and my first problem is that the heli leans backwards by itself (even when not flying). This is really annoying as when hovering the heli keeps moving backwards (the hose tilts backwards) and its hard to control it. Secondly, the heli doesn't hover as high as it used to. When the left stick is all the way up it only hovers about 4 feet. I have no idea why this happens.Any help or ideas will be useful. Thanks in advance!!! Quote Link to comment Share on other sites More sharing options...
Owen Hailey Posted August 29, 2008 Share Posted August 29, 2008 Hi Hari.There is a big Cx2 following on this forum, so if you re post it on the cx one be low this one you will get all the help you need, hope this will get you flying.happy hovering Owen Quote Link to comment Share on other sites More sharing options...
Kevin Davies 2 Posted August 30, 2008 Share Posted August 30, 2008 Hi Harry. you will find loads of help on the forum. is your battery moving backwards as this affects the centre of gravity, is your swash level? check the locking collar on the inner shaft is tight, is your batt fully charged? hope this helps. Kevin Quote Link to comment Share on other sites More sharing options...
B O Posted August 30, 2008 Author Share Posted August 30, 2008 The swash level is correctly in place but even without a battery it tilts backwards.Thhanks for the help though Owen an Davies Quote Link to comment Share on other sites More sharing options...
Gemma Jane Posted August 30, 2008 Share Posted August 30, 2008 Hi, does the heli looks like it is titled backwards when it is placed on a flat surface? If so I can only think that one of the carbon rods that holds the body on is not going through the inner mechanism where it should or the skids are not pushed in all the way at the front. Any chance of a picture? Quote Link to comment Share on other sites More sharing options...
Former Member Posted August 30, 2008 Share Posted August 30, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Gemma Jane Posted August 30, 2008 Share Posted August 30, 2008 Eric, just dangled my CX-2, mine will balance with or without the battery when dangled from the flybar so the battery must be central(ish) to the CoG, it must be something pretty fundemental as the body is very light weight, it balances without the body on just the same with or without the battery.Hari, are you using a standard battery? If so is it going all the way to the stop at the front when you fit it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.