Rich too Posted November 6, 2018 Share Posted November 6, 2018 i am trying to set the ignition ( to off) on the failsafe in the event of a signal failure. However, unlike the 6008, the 617 receiver seems to limit inputs to throttle only. How do i set the failsafe on the 16sz with a 617 rx? Much appreciated. Quote Link to comment Share on other sites More sharing options...
Rich too Posted November 6, 2018 Author Share Posted November 6, 2018 I may have answered this myself. I am concerned about servo failure. But in the event of loss of signal the throttle will be cut and it is unlikely that the servo will fail at that point. On the other hand in the event of servo failure I can cut the ignition with a assigned switch. That should be adequate! And I believe how my 7c works. Edited By Rich too on 06/11/2018 20:29:49 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.