Ashley Hunt Posted June 28, 2020 Share Posted June 28, 2020 I’m probably being very dumb but I’m new to 2.4 GHz transmitters and receivers. I’ve bought a second hand DX8 and I’m trying to bind a receiver to it. Following the spectrum instructions it says to insert a bind plug into the BATT/BIND port and then power up the receiver. How do I power up the receiver if the bind plug is in the BATT port. Any help would be very gratefully received ! Quote Link to comment Share on other sites More sharing options...
Johnny Kirkham Posted June 28, 2020 Share Posted June 28, 2020 You plug the power lead into any of the servo sockets whilst binding then swap over when bind is complete Quote Link to comment Share on other sites More sharing options...
Ashley Hunt Posted June 28, 2020 Author Share Posted June 28, 2020 That’s brilliant, thanks very much. I thought that might be the case but I didn’t want to risk damaging the receiver if I was wrong. Thanks again Ashley Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.