Owen Hailey Posted February 21, 2009 Share Posted February 21, 2009 Hi all I have made many coments about getting the most out of that cheaper heli, and this is a way of getting the best out of your Syma, if you own one of these you will know how they only have a three speed motor control, and limited tail control, so if it can be made better so be it, as the heli its self is very durable and flys nice and flat and level,I thought it was worth a go, so I have just got a lot of second hand parts and radio gear and in amung it was a Century mixer giro board, and very small 6 channel rx, and I have some other tx's to chose from so if you can get the bits to gether on the cheap, this is for you, it not worth doing if you have got to bie the bits from new. But thats by the way. I took the plung and did it, and this is what I did. I removed the standard rx and conected in the new rx and speed and giro mixer board, and put it in a place to get the c of g rite, and fixed them on the frount of the battery carrier with dubble sided tape and a cable tie, this was spot on and the heli hovers at low throtle, but gets fullward flite on higher throtle, and as for the tail it has full control, as is expected on any 4 channel heli, so I am fully chuffed with the out come, it has made my faverit hack heli so much more fun to fly. Happy hovering Owen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.