Tim North Posted June 12, 2007 Share Posted June 12, 2007 I have recently acquired a ripmax xtra air 25 esc for brushed motors. I didn't get any manual with it and need to know what the jumper settings are for a 2 and 3 cell lipo. Does anyone out there have one of the units and can tell me the settings? Any info would be great. Quote Link to comment Share on other sites More sharing options...
Steve Bradley Posted June 12, 2007 Share Posted June 12, 2007 Hi Tim. Just put one of these in my GWS A10. If you can let me have your e-mail address I can send you a scan of the instructions. Steve. Quote Link to comment Share on other sites More sharing options...
Steve Bradley Posted June 19, 2007 Share Posted June 19, 2007 Hi Tim. Did you get the scans ok? Quote Link to comment Share on other sites More sharing options...
Tim North Posted June 22, 2007 Author Share Posted June 22, 2007 Steve, Sorry,I didn't receive any e-mail from you. Anyway, I reckon I've worked out the positions for the jumper...just waiting for the weather to improve so I can put it to the test! Thanks for all your help, cheers Tim Quote Link to comment Share on other sites More sharing options...
Steve Bradley Posted June 24, 2007 Share Posted June 24, 2007 Just resent them. Hope you get them this time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.