Dave Potter

Hi Guys. When charging my 2.2 lipo Batteries on my charger they charge to 0.0A on my charger but the charger never reaches full. when I checked them on my tester it gives me a reading of 12.56V and 98.56 % is this ok to fly? Regards Dave........

Hi guys, Thanks for all the advice I have received from you all. It's all been a great help. I have now brought myself a wattmeter. Cheers Dave...

Sorry guys it's a uno wat. what a plonker I am.

Hi Denis. It's a wots wot i had given to me for my grandson to learn to fly. I have converted it to electric. I wil be using 4cel lipo battery and the all up weight will be about 5lbs Thanks Denis. Edited By Dave Potter on 21/02/2018 16:26:11

Hi Guys. I have brought a new Turnigy motor SK3 4240 740 and I can't find any prop sizes can anyone help ? Thanks Dave.....

Hi Guys. Anyone know where I can find a smaller covering iron for getting in those little tight corners. I have triied most model shops without any success. Thanks for any input....

Hi Folks, Can someone recommend a cheapish motor with a bit of power for a balsa wood wot 4 3 or 4 cell ? Dave....

Thanks guys for the information. I think i'll be going up your route Dave W. I already have the motor EMax G2820/07 850w. Sorry guys the first message i sent back is wrong. Edited By Dave Potter on 02/12/2017 11:24:37

Thanks guys for the information. I think i'll be going up your route Dave W. I already have the motor EMax GT42829/07 850w. Edited By Dave Potter on 02/12/2017 11:23:17

I have been given a old UNO WOT and I want to convert it to electric. What would be your best set up to use? I need something with a little power.Three sell or four.

Hi Guys. I have just finished rubbing down filler on a glassed wing bandage. Do I have to do anything else apart from dusting it off before covering with pro film? I've covered over filler before and it hasn't stuck down to well. Regards Dave...

Hi Friends, Thanks for the information you have given me. I have now sent a email to Mr Reeves hoping he can help me. Cheers Dave.... PS don't know what i would do without this site. So many helpful people...

Hi Guys, Does anyone out there have the manual for a Gangster 63. It's the old one with foam wings. I will pay for it plus postage. Regards Dave...

I guys, I have just finished building myself a electric Junior 60. I have covered it with Solatex and given it two coats of cellulose dope to fill in the weave, to keep the dirt out. Now I need to do some brush painting on the wings, can anyone tell me what paint to use…. Thanks for any help you can give me….

Thanks guys, some very interesting answers. I am just going to solder the 3 inches on and see how it goes. Thanks Friends...