Colin Boast 1

My Tx was left in my cold but dry garage last October with batteries removed. When replaced with new batteries last week, the Tx lights up okay but no data written on the blank screen. Anybody know what's wrong?

Thanks for the prompt reply, I'll try some different props. and lower the total thrust slightly, Colin.

Has any one else experienced this? open up esc throttle to maximum revs. for take-off then suddenly horrible squealing noise from motor (or so it seems) and power drops to near zero rpm! I wrongly took motor apart to check if magnets loose and binding, but all ok. Replace with a new motor anyway, and still this screech appears at high rpm. Eventually replaced esc with a different make. Then perfect! No problem at all! Has anyone else experienced in compatible esc/motor combination, despite being used well within specification? It appears that certain esc's won't behave at high revs, even if throttle advanced slowly.

Sounds like I've had the same problems, regarding wiring and spinners. I too, grooved in the wiring, covered the grooves with thin white plastic sheet and discarded the pathetic spinners. I look forward to flying the model though, following your positive experiences. Thanks for advice,

Has anyone out there built this ARTF kit? Did you have problems concealing the wiring and fitting the props and spinners? I've spent much head scratching.