-
Posts
182 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Posts posted by Kevin Wesley
-
-
Mainly Peter Rake free plans. All great designs, All fly well
-
-
-
-
-
-
My electric DH2 from the Mike Roach plan
-
-
I've often used a steel ruler, as Allan says, just lay it on the sealing iron for a few minutes before use, works a treat. I'll certainly take a look at these "Quilting irons" though
-
Hi Simon,
Reading your build. very interesting. Are you aware that Mick Reeves sell self adhesive alluminium foil ,I use it a lot on my scale models and can highly reccomend it. Kev
-
Hi Roy, Noticed your article. I've built two DH2's one electric, and one at third scale petrol power. I love em ! I made my own wheels, it looks very realistic if you glue balsa "spokes" round two discs of light ply with balsa sandwiched between , then you can cover it with solartex,.looks just like the real thing. I have pictures of my electric model on my photo album on this site, if you want insparation
Best regards Kev Wesley
-
Hi Bob, Just something i remember learning from someone , or somewhere from days gone by when trying not to lose valve collets on a four stroke engine. If you put the motor into a clear plastic bag big enough to get your hands in when removing the cir-clip, if it flies off it cant get lost (or hit you in the eye !) cos it stays in the bag
Kev
-
1st Grummant Skyrocket"2nd Zero3rd Pucara
Lengthening Wires
in ESCs (Speed Controllers)
Posted
Hi, Just my humble practical opinion. Ive been flying a Blackhorse Mosquito for at least 3 seasons now. (over fifty flights) both speed controllers are in the nacelles with approx 400mm lead to them from the battery which is in the nose of the aircraft. I have had no problems with this set up At all. I also have 4mm bullet connectors in mid length, so i can remove the wings when i need too. Right or wrong, its worked for me without a hiccup